3 Bar Safety Valve DN15 Vaillant VMI 32/362-7 Ref. 190732

Vaillant boilers compatible with reference 190732

Safety valve with reference 190732. Nine confirmed compatibilities: VMI 280-7 and VMI 282-7.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. 190732 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 190732. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms and faults that the safety valve 190732 resolves.

The safety valve releases pressure when the circuit exceeds its setting. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  It constantly drips from the bleed valve of the gas valve, even though the boiler has been off for hours.

  Cause: The valve seat has scale residue and no longer seals properly.

  Measure the cold fill pressure: if it is close to 3 bar, the system is operating at its limit. Bleed and replenish pressure before changing the gas valve.

• 02

  The boiler repeatedly loses pressure and the circuit needs to be refilled every few days.

  Cause: An internal leak in the seat is slowly allowing water to escape into the drain.

  Check if the discharge pipe or the area under the gas valve is wet or has limescale marks: if so, the leak is coming from there.

• 03

  The pressure rises quite a bit when heating, but the gas valve does not trigger or release water.

  Cause: The internal mechanism may be jammed due to scale buildup on the stem.

  With the boiler cold, operate the manual bleed lever to check that the mechanism moves freely.

• 04

  The valve is stuck and does not release pressure even when pulling the manual lever.

  Cause: The stem is stuck due to limescale and does not lift the shutter even though the circuit exceeds 3 bar.

  If the lever does not move when pulled in cold, do not force it: it is a safety fault and the gas valve needs to be replaced.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Vaillant safety valve 190732

Catalogue reference

190732

Brand

Vaillant

Type of part

Safety valves

Units in stock

1 unit

Status

Refurbished

Warranty

1 year

Shipping

1-2 business days

Return

14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Connection diameter

DN15

Set pressure

3 bar

TÜV code

TÜV-SV-40-1089-H-50

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Vaillant VMW 242/2-3 Manual (PDF)Document © Vaillant, provided as a technical reference.