Watts 3/8" Safety Valve Chaffoteaux Pigma Ref. 61312668
RefurbishedChaffoteauxSafety valvesWatts

Watts 3/8" Safety Valve Chaffoteaux Pigma Ref. 61312668

Stock · 1 unit

When you open the tap or start the heating, the Watts 3/8" Safety Valve Chaffoteaux Pigma Ref. 61312668 ensures that the circuit pressure does not exceed the established limit. Its function is to release water if the pressure exceeds 3 bar. If it fails, you will notice that it drips continuously or does not discharge properly. This valve is compatible with models such as Chaffoteaux Alixia, Pigma, and Talia, among others. It is advisable to replace it when it shows leaks or does not respond to pressure changes.

VAT included

Compatibility

Chaffoteaux boilers compatible with reference 61312668

Safety valve with reference 61312668. 14 verified compatibilities: Alixia 24 FF and Alixia 24 CF.

Proven compatibility

Boiler modelFamilyVerification
Chaffoteaux Alixia 24 FFChaffoteaux AlixiaContrasted
Chaffoteaux Alixia 24 CFChaffoteaux AlixiaContrasted
Chaffoteaux AlixiaChaffoteaux AlixiaContrasted
Chaffoteaux PigmaChaffoteaux PigmaContrasted
Chaffoteaux Pigma GreenChaffoteaux PigmaContrasted
Chaffoteaux Inoa Green 24EUChaffoteaux Inoa GreenContrasted
Chaffoteaux Inoa GreenChaffoteaux Inoa GreenContrasted
Chaffoteaux Talia SystemChaffoteaux TaliaContrasted
Chaffoteaux TaliaChaffoteaux TaliaContrasted
Chaffoteaux Clas HEAriston ClasContrasted
Chaffoteaux ClasAriston ClasContrasted
Chaffoteaux Genus HEAriston GenusContrasted
Chaffoteaux GenusAriston GenusContrasted
Chaffoteaux EgisAriston/Chaffoteaux EgisContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the reference 61312668 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 61312668. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the safety valve 61312668 resolves.

The safety valve releases pressure when the circuit exceeds its setting. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The valve is continuously leaking water through the discharge pipe, even when the boiler is cold.

    Cause: The seat does not seal properly because there is dirt or scale between the spring and the shutter after previous use.

    Actuate the manual bleed lever several times to try to remove that dirt before considering that the valve is damaged.

  • 02

    The valve has tripped once and since then it continues to leak, although the pressure has returned to normal levels.

    Cause: When opened abruptly, small debris is dragged that remains on the seat and prevents a good seal.

    Measure the cold filling pressure of the circuit: if it is close to the gas valve's triggering point, the same pressure spike may occur repeatedly and seem like a fault of the part.

  • 03

    The circuit loses pressure every day without any noticeable leaks in the radiators, bleed valves, or pipes.

    Cause: An internal leak in the safety valve allows water to escape drop by drop into the drain without being visible.

    Follow the discharge pipe from the valve to the drain and check if it is damp or has limescale marks: this indicates that the leak comes from there and not from another part of the circuit.

  • 04

    The valve drips water just when the boiler heats up and stops doing so when it cools down.

    Cause: The valve opens because the actual pressure in the circuit exceeds its safety limit at that moment.

    Before replacing it, check the air pressure of the expansion vessel with the system empty of water: if it has lost pressure, the circuit will not cushion the expansion and may force the valve even if it is in good condition.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Chaffoteaux safety valve 61312668

Catalogue reference
61312668
Brand
Chaffoteaux
Type of part
Safety valves
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Connection / model
3/8"-EL1
Frequently Asked Questions

Frequently asked questions about the safety valve 61312668

Is this Watts 3/8"-EL1 valve compatible with the Chaffoteaux Talia?
Yes, the Chaffoteaux Talia (Talia / Talia Green / Talia System) is on the list of compatible boilers.
Is the Watts 3/8"-EL1 valve an original part from Chaffoteaux or Ariston?
No; the manufacturer marked on the part is Watts, not Chaffoteaux or Ariston.
What fault does this Watts valve solve in a Chaffoteaux Minima HE 30?
Releases water from the circuit if the pressure exceeds the set value, protecting the boiler from overpressure.
When should the Watts 3/8"-EL1 valve of an Ariston Genus HE be replaced?
It is replaced when it leaks continuously or when it does not close properly after being triggered.

Spare parts related to Chaffoteaux Chaffoteaux Alixia

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Watts 3/8" Safety Valve Chaffoteaux Pigma Ref. 61312668