Ineco Transformer For Ferroli NEF 127 / New Elite - Ref. 697254-64
Transformer identified by its label as manufactured by Ineco S.r.l. (Italy), with type code 697254-64, mounted in Ferroli NEF 127 and New Elite (N.E. series) boilers. It operates at 220-240V, 50/60Hz, with a power of 0.7 VA and thermal class T80. The available material does not specify its exact function within the circuit; it is replaced when the component it powers stops receiving voltage.
VAT included
Consult via WhatsAppFerroli boilers compatible with reference I36701940
Ignition transformer with reference I36701940. A verified compatibility: N.E.112.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Ferroli N.E.112 | Ferroli New Elite (N.E.) | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. I36701940 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference I36701940. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the ignition transformer I36701940 resolves.
The ignition transformer generates the high voltage for the spark of the electrodes. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
A component of the boiler stops receiving power while the rest continues to operate.
Cause: This transformer is of low power and only affects the circuit it supplies. If it fails, only the part it powers will lose voltage.
Follow the wiring from the transformer to the affected component and measure if voltage reaches the other end before purchasing the part.
- 02
The fuse associated with this transformer keeps blowing repeatedly.
Cause: A short circuit in the component that powers this transformer causes the protection to trip quickly.
Disconnect the component powered by this transformer and check if the fuse holds before replacing the part.
- 03
There is a burn mark or a strange smell in the area of this transformer.
Cause: When operating at low power, any sustained overload causes the winding to heat up, which is quickly noticeable.
Disconnect the power supply and check if the transformer or the nearby wiring show any signs of heat damage before proceeding.
- 04
The fault is intermittent: the affected component works some days and not others, without any apparent reason.
Cause: A winding with a weak point generates an unstable voltage under load, even though it may appear correct when unloaded.
Measure the output voltage of the transformer several times, when cold and with the boiler hot, to see if it varies.
Fault codes for Ferroli that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| A01 | Burner lockout (ignition fault). | If the ignition transformer is faulty, no spark is generated and the burner does not ignite. Check for the absence of spark at the electrodes and inspect the transformer (primary supply and high voltage output) or replace it for testing. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Ferroli Ignition Transformer Datasheet I36701940
- Catalogue reference
- I36701940
- Brand
- Ferroli
- Type of part
- Transformers
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Voltage
- 220-240 V, 50/60 Hz
- Power
- 0.7 VA (printed "07VA")
- Thermal class
- T80
- Type code
- 697254-64
- Batch code
- D1191
- The actual manufacturer of this transformer is Ineco (Italy), not Ferroli: the boiler is Ferroli, but the part is made by a third party.
Frequently asked questions about the ignition transformer I36701940
Who manufactures the transformer of the Ferroli New Elite?
Does this Ineco transformer work for the Ferroli NEF 127?
What fault indicates that the transformer of the Ferroli New Elite needs to be replaced?
What voltage and power does the Ineco 697254-64 transformer operate at?
Spare parts related to Ferroli Ferroli New Elite (N.E.)
