Roca Neobit 24/24F FIME Extractor Ref. TC 10.00
Combustion gas extractor (fan) for Baxi Roca Neobit and Victoria boilers of this range. The motor label, inside the unit, identifies the manufacturer as FIME, with the code TC 10.00 and visible CE marking. It is replaced when the boiler locks due to a flue gas extraction fault, the extractor does not start, or it rotates with difficulty.
VAT included
Consult via WhatsAppBaxi Roca boilers compatible with reference 122062850
Extractor with reference 122062850. Six confirmed compatibilities: 20/20F and 24/24F.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Baxi Roca 20/20F | NEOBIT | Contrasted |
| Baxi Roca 24/24F | NEOBIT | Contrasted |
| Baxi Roca 20 | VICTORIA | Contrasted |
| Baxi Roca 20/20 | VICTORIA | Contrasted |
| Baxi Roca 20/20 T | VICTORIA | Contrasted |
| Baxi Roca 20/20F | VICTORIA | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the ref. 122062850 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 122062850. If it is not visible, do not identify the part by its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the extractor 122062850 resolves.
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler tries to ignite, you can hear the fan spinning for a moment and then everything stops abruptly with a flue fault code.
Cause: The extractor does not reach the minimum speed required by the control board before allowing the gas to flow, which is why the PCB stops the ignition for safety reasons.
Check if the extractor is spinning at its normal speed or if it is stuck at half speed; if it stops, also check that the flue outlet is not blocked before replacing it.
- 02
The extractor does not start at all, it doesn't even make an attempt.
Cause: The motor may be blocked due to use or internal corrosion, and the control board does not detect any rotation.
With the boiler unplugged, try to turn the turbine by hand; if it is stiff or does not move, the mechanical fault is confirmed before ordering the part.
- 03
A strange buzzing or rubbing noise is heard when turning on the boiler.
Cause: The bearings of the extractor wear out over time and the blades start to rub against the casing.
Listen to see if the noise changes with the rotation speed; a constant metallic rubbing is usually a bearing issue and not an electronic fault.
- 04
The boiler often locks out due to 'combustion failure' or 'flame anomaly' for no apparent reason.
Cause: If the extractor does not move the correct air flow, the flame does not stabilize and the PCB cuts off for safety.
Check the air intake filter and the external flue terminal before confirming the fault of the extractor.
Fault codes for Baxi Roca that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| 40-70-90 | Power failure in gas solenoid valve. | The gas valve (block 122062850) does not open or its coil is open/stuck, so no gas reaches the burner and the PCB locks due to the absence of a flame. Check by measuring if a signal reaches the solenoid valve during ignition and the resistance of its coils; if there is a signal and the coil is out of range or does not open, replace the valve. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for Baxi Roca extractor 122062850
- Catalogue reference
- 122062850
- Brand
- Baxi Roca
- Type of part
- Extractors
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Manufacturer
- FIME
- Component code
- TC 10.00
- CE marking
- present on the motor label
Frequently asked questions about the extractor 122062850
Is this part a gas valve or the flue extractor of the Neobit 24/24F?
Who manufactures this extractor for the Baxi Roca Neobit?
Does this extractor from the Neobit 24/24F also work for the Victoria 20/20?
How do I check that this extractor is the right one for my boiler?
Why does the boiler lock out when this fan fails?
Spare parts related to Baxi Roca VICTORIA
