PCB Baxi Roca Neobit 24/24F - Ref. 122123680
RefurbishedBaxi RocaPCBs (control boards)OMRON (relay G2RL-2)

PCB Baxi Roca Neobit 24/24F - Ref. 122123680

Stock · 13 units

The Baxi Roca Neobit 24/24F PCB controls the ignition, burner modulation, pump, and safety features of the boiler. When it fails, the boiler may not start, become locked, or behave erratically. This part is compatible with boilers from the Neobit range, such as the Neobit 24/24 F model, among others. It should be replaced when these symptoms occur to restore the proper functioning of the boiler.

VAT included

Compatibility

Baxi Roca boilers compatible with reference 122123680

PCB with reference 122123680. A proven compatibility: Neobit 24/24 F.

Proven compatibility

Boiler modelFamilyVerification
Baxi Roca Neobit 24/24 FNeobitContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 122123680 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 122123680. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB 122123680 resolves.

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler is completely dead, no LED or display lights up.

    Cause: The F1 fuse on the PCB has blown, usually due to a voltage spike or a downstream short circuit, cutting off power to all the electronics.

    Before changing the PCB, open the cover and visually check if the fuse F1 is blown or blackened, and check its continuity with a multimeter.

  • 02

    The circulation pump or the gas valve do not activate even though the boiler seems to be functioning.

    Cause: The relay on the PCB that supplies power to those components can stick or fail to close the contact, even though the rest of the circuit remains energized.

    With the boiler calling for heat, listen for the click of the relay when switching before replacing the pump, gas valve, or the PCB.

  • 03

    Different fault codes appear that seem unrelated to each other.

    Cause: The PCB misinterprets the signals from the safety sensors and blocks the boiler even though those components are in good condition.

    Note the code and the moment it appears, and discard NTC, pressure switch, and flame electrode by measuring their continuity.

  • 04

    The remote control or the thermostat cannot get the boiler to respond.

    Cause: The microprocessor on the PCB manages that communication, and if it fails, the boiler ignores the ignition command.

    Check that the thermostat is powered and that the wiring is securely connected to the terminals of the PCB before replacing it.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Baxi Roca PCB 122123680

Catalogue reference
122123680
Brand
Baxi Roca
Type of part
PCBs (control boards)
Units in stock
13 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

PCB manufacturer
Baxi Roca Heating; logo printed on the circuit
PCB code (silkscreen)
E961077F
Reference
1271002190 (equivalent to 122123680)
IC / firmware U3
961079R
IC / firmware U4
961080A-3
Relay (component mounted on PCB)
Omron G2RL-2, 12VDC coil, made in Japan
Fuse F1
3.15A
Frequently Asked Questions

Frequently asked questions about the PCB 122123680

Is this PCB suitable for both a Roca Neobit 24/24F and a Baxi Roca Neobit 24/24 F?
Yes, it is suitable for both: Baxi Roca Neobit 24/24F and Baxi Roca Neobit 24/24 F.
Is the PCB of the Neobit 24/24F manufactured by Omron?
No. Omron manufactures the G2RL-2 relay mounted on the PCB; the manufacturer of the PCB is Roca (Baxi Roca Heating).
Are 122123680 and 1271002190 the same reference for this PCB of the Neobit?
Yes, they are equivalent: the label on the PCB carries the code 1271002190 and the catalog lists the reference 122123680.
What fuse does the PCB of the Baxi Roca Neobit 24/24F use?
A 3.15A F1 fuse.
How can you identify this PCB as the one for the Neobit 24/24F by looking at it?
By the code printed on PCB E961077F and the Baxi Roca logo silk-screened on the circuit itself.

Spare parts related to Baxi Roca Neobit

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
PCB Baxi Roca Neobit 24/24F - Ref. 122123680