Bertelli & Partners Immergas Eolo Mini 24 PCB Ref. 024038
Bertelli & Partners (B&P) control PCB, installed in Immergas boilers from the Eolo Mini, Eolo Star, and Nike Mini ranges. The silkscreen shows the code DIM515-.... (incomplete) and the codes 70200.2 and 70000.2 for the transformer and the reverse side of the board. It is the component that manages the operation of the boiler; it is replaced when this control fails.
VAT included
Consult via WhatsAppImmergas boilers compatible with reference 024038
PCB with reference 024038. Three confirmed compatibilities: EOLO MINI 24 and EOLO MINI EXPORT.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Immergas EOLO MINI 24 | EOLO MINI | Contrasted |
| Immergas EOLO MINI EXPORT | EOLO MINI | Contrasted |
| Immergas EOLO STAR 24 | EOLO STAR | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 024038 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 024038. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB 024038 resolves.
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler does not ignite and the remote control does not communicate with it.
Cause: The PCB does not process the ignition signal sent from the control even though the boiler has power.
Check the batteries and the remote control synchronization before assuming that the fault is in the PCB.
- 02
The boiler locks itself without a clear warning and does not reset by itself.
Cause: An internal fault in the PCB interrupts the operating cycle and activates the safety lock.
Note if the lockout always occurs with the same demand, heating or domestic hot water, before changing the PCB.
- 03
When trying to ignite, a spark attempt is heard but the flame does not light.
Cause: The ignition transformer soldered to the PCB does not deliver enough current to the electrode.
Check if there is a visible spark at the electrode; if not, inspect the electrode itself and its wiring before replacing the PCB.
- 04
The boiler is completely unresponsive, with no indicator lights or display.
Cause: An internal fault cuts the main power supply to the entire system's PCB.
Check the fuse on the PCB and the incoming power supply before considering it faulty.
Fault codes from Immergas that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| 04 | Generic anomaly boiler control board | The microprocessor of the control board (PCB) incorrectly recognizes an internal signal and locks the boiler. Check voltages/power supply and connectors of the PCB; if after reset and checks the issue persists, confirm by replacing/testing the board. |
| 11 | Anomaly in flue pressure switch | The PCB may give an incorrect consent to the fan start-up, causing the detection of a flue pressure switch fault. Verify that the PCB provides the correct control/power supply to the fan and check the pressure switch and pipes; if with the pressure switch and fan OK the fault persists, the PCB is the cause. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Immergas PCB 024038
- Catalogue reference
- 024038
- Brand
- Immergas
- Type of part
- PCBs (control boards)
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- PCB manufacturer
- Bertelli & Partners (B&P)
- Boiler brand (screen printed)
- Immergas
- Screen printing code
- DIM515-....
- Transformer code T1
- 70200.2
- PCB reverse code
- 70000.2
Frequently asked questions about the PCB 024038
Is this PCB Ref. 024038 compatible with my Immergas Eolo Mini 24 boiler?
Does the PCB Ref. 024038 also work for the Eolo Mini Export?
Which models are compatible with the Bertelli and Partners PCB Ref. 024038?
What fault codes are documented for this PCB?
Who manufactures the PCB Ref. 024038?
When should I consider replacing the PCB in my Eolo Mini or Eolo Star 24 boiler?
Spare parts related to Immergas EOLO MINI
