Chaffoteaux Niagara Delta 30 FF Electronic Display Ref. 1305232

Chaffoteaux Niagara Delta 30 FF Electronic Display Ref. 1305232

Stock · 1 unit

If your boiler does not start, locks up, or exhibits erratic behavior, you may need the Chaffoteaux Niagara Delta 30 FF electronic control board, reference 1305232. This PCB is responsible for regulating the ignition, burner modulation, pump, and safety features of the boiler. If it fails, you might see fault codes such as 31, indicating a problem with the display board, or 32, which points to a communication defect between the main board and the display board. It is compatible with the Niagara Delta 30 FF model, among other boilers in the range. It is recommended to replace it upon detecting any of these symptoms.

VAT included

Compatibility

Chaffoteaux boilers compatible with reference 1305232

PCB with reference 1305232. A proven compatibility: Niagara Delta 30 FF.

Proven compatibility

Boiler modelFamilyVerification
Chaffoteaux Niagara Delta 30 FFNiagara DeltaContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the reference 1305232 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 1305232. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB 1305232 resolves.

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The screen does not turn on, it remains completely off and black.

    Cause: The display module is not receiving power from the main PCB, either due to the connection cable or a fault in the module itself.

    Check that the flat cable or the connector between the display and the main PCB is properly inserted and free of oxidation before replacing the display.

  • 02

    Symbols, lines, or meaningless digits appear on the display instead of the normal information.

    Cause: The display circuit sends corrupted data to the panel, which is usually a fault of the display module.

    Turn off and on the boiler from the main switch; if the erratic symbols reappear after the reset, it is not a temporary hang-up.

  • 03

    The boiler is working (heating, making burner noise) but the display shows nothing or is stuck.

    Cause: Communication between the display and the control board has been lost, and the display module is not receiving or showing data.

    Confirm that the boiler is still providing heating or hot water; if it is working but the display is not showing information, the problem lies in the display module, not in the power PCB.

  • 04

    The screen lights up for a moment when starting and then turns off by itself.

    Cause: An intermittent fault in the power supply or in the module connector causes the display not to stay on.

    Check the condition of the connector and the flat cable that reaches the display, looking for bent or loose pins, before declaring the part faulty.

Fault codes Chaffoteaux that this part resolves

CodeFaultDiagnosis and solution
31Problem in the display board.The display PCB (ref. 1305232) presents a fault (e.g., EEPROM/interface or power supply), which generates this error; check 5 V at the connector, bus continuity, and, if possible, test with a known good display PCB.
32Communication fault between the main board and the display board.The display PCB (1305232) may stop communicating (serial interface fault or no power), triggering the code; check 5 V on cable/flat, communication signals and wiring, and rule out by replacing the display PCB.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Chaffoteaux 1305232 PCB.

Catalogue reference
1305232
Brand
Chaffoteaux
Type of part
PCBs (control boards)
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Code printed on PCB
1305232
Frequently Asked Questions

Frequently asked questions about the PCB 1305232

Is this Chaffoteaux Niagara Delta 30 FF electronic display compatible with other models in the Niagara Delta range?
Yes, it is compatible with the Niagara Delta 30 FF model.
When should I consider replacing the electronic control board in my Niagara Delta 30 FF boiler?
You should replace it when the boiler does not ignite, displays erratic symbols, or loses communication with the display.
Is the code 1305232 that appears on the screen the sales reference for this part?
Yes, the code 1305232 matches the sales reference for this electronic display.
Is this part the electronic display or the PCB of the boiler?
It is the electronic display Chaffoteaux Niagara Delta 30 FF, not the control board.
What fault codes are documented for this display?
The documented fault codes are 31 and 32.
What is the product reference I should look for if I need this display?
The reference you need to look for is DCND30FF.

Spare parts related to Chaffoteaux Niagara Delta

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Chaffoteaux Niagara Delta 30 FF Electronic Display Ref. 1305232