Wilo Circulating Pump Motor for Saunier Duval Isofast F 30 E H-MOD Ref. 0010034167
Refurbished Saunier Duval Pumps Wilo

Wilo Circulating Pump Motor for Saunier Duval Isofast F 30 E H-MOD Ref. 0010034167

When the heating starts, the Wilo Circulating Pump Motor for Saunier Duval Isofast F 30 E H-MOD Ref. 0010034167 is responsible for moving the water through the heating circuit. If this pump fails, you will notice cold radiators, strange noises, or overheating due to lack of circulation. This component is compatible with the Isofast F 30 E H-MOD model, among others in the Isofast range. A technician must confirm through diagnosis whether it needs to be replaced if you experience the mentioned symptoms or if fault code 11: Circulation pump blockage occurs.

Type of part
Pumps
Status
Refurbished
Catalogue reference
0010034167
Warranty
1 year
VAT included Stock · 3 units
Compatibility

Saunier Duval boilers compatible with reference 0010034167

Circulating pump with reference 0010034167. A proven compatibility: Isofast F 30 E H-MOD.

Proven compatibility

Boiler modelFamilyVerification
Saunier Duval Isofast F 30 E H-MODIsofastContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 0010034167 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 0010034167. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms that require diagnosis in the circulator pump 0010034167

The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The pump does not start at any of the three speeds.

    Cause: The rotor is stuck or the start capacitor is not driving the motor.

    Try to manually free the shaft with a screwdriver in the front slot, with the boiler turned off, before replacing it.

  • 02

    Noise or vibration in the motor

    Cause: Trapped air in the circuit or a worn impeller cause an unbalanced rotation.

    Bleed the air from the system and check the pressure before replacing the pump.

  • 03

    Poor circulation, cold radiators despite the boiler working.

    Cause: A worn or partially blocked impeller does not provide the necessary flow even if the motor is running.

    Test the three speeds of the pump and check if circulation improves before replacing it.

  • 04

    Water leak from the motor shaft

    Cause: The internal mechanical seal loses tightness with use.

    Dry the area and check if the leak reappears after a while in operation, to rule out that it comes from a nearby joint.

Fault codes Saunier Duval that require diagnosis

CodeFaultTechnical checks
11Circulation pump blockage.The pump motor is blocked (seized rotor or air/debris) and does not move flow, so the electronics trigger the 11; check by removing the pump cap/bleeder and turning the shaft, bleeding the circuit, and verifying that the pump receives 230 V.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Saunier Duval circulator pump 0010034167

Catalogue reference
0010034167
Uniclima internal SKU
MBCI30HMOD
Brand
Saunier Duval
Type of part
Pumps
Units in stock
3 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Capacitor/voltage
3.5uF-400VDB/-230V-50Hz
Thermal class
Class F - TF95
Pressure/protection
PN3-IP44
Speeds
III 2600 rpm / II 2360 rpm / I 2000 rpm
Current/power speed III
0.52A / 118W
Current/power speed II
0.40A / 86W
Current/power speed I
0.27A / 58W
Reference
4516408
Secondary code
4515477
Date code
05.06
Frequently Asked Questions

Frequently asked questions about the circulator pump 0010034167

Is the pump of the Saunier Duval Isofast F 30 E H-MOD an original part from Saunier Duval?
No. The motor is Wilo; the manufacturer is explicitly stated on the PCB.
How many speeds does the pump of the Saunier Duval Isofast F 30 E H-MOD have?
Three: 2000, 2360, and 2600 rpm, according to the label.
What is the power consumption of the Saunier Duval Isofast F 30 E H-MOD pump?
Between 58W at speed I and 118W at speed III, according to the label.
How many models are compatible with the Wilo MBCI30HMOD circulator pump motor?
It is only compatible with the Isofast F 30 E H-MOD model.
What fault codes are documented for this product?
The documented fault code is 11.
Where can I find the reference for the circulation pump motor?
MBCI30HMOD is Uniclima’s internal SKU for locating this listing. To confirm compatibility, check the manufacturer’s reference and the exact appliance model.

Spare parts related to Saunier Duval Isofast

Entrega calculada por destino Delivery time shown at checkout
1-year warranty reviewed and tested
14-day return uninstalled parts
Technical support we verify your model
Wilo Circulating Pump Motor for Saunier Duval Isofast F 30 E H-MOD Ref. 0010034167