Gas Burner Kit Baxi Roca Victoria 20 20 F GN Ref. 122051630
When you turn on the heating of your Baxi Roca Victoria 20 20 F GN, the Gas Burner Assembly is responsible for mixing air and gas to maintain the flame that heats the heat exchanger. If you notice difficulties in igniting, irregular flame, strange noises, or lockouts due to flame failure, it is possible that this burner is malfunctioning. This assembly is compatible with the Baxi Roca Victoria range, ensuring its operation in models such as the Victoria 20/20 F, among others. A technician should confirm through diagnosis whether it needs to be replaced when signs of wear or dirt affecting its performance are present.
- Type of part
- Gas burners
- Status
- Refurbished
- Catalogue reference
- 122051630
- Warranty
- 1 year
Baxi Roca boilers compatible with reference 122051630
Burner with reference 122051630. A proven compatibility: Victoria 20/20 F.
Verified compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Roca Victoria 20/20 F | Roca Victoria | Verified |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the reference 122051630 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 122051630. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the burner 122051630
The burner performs the combustion of gas. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler does not ignite and shows a lock or flame error.
Cause: The ignition electrode in the box does not generate a spark, or the detection electrode does not sense the ionization even though there is a flame.
Clean the electrodes with a fine paper and check the gap between the tips before replacing the entire box.
- 02
Some injectors in the grid are burning and others do not ignite.
Cause: Nozzles clogged with dirt from the gas network prevent fuel from reaching those specific points.
Clean the visible injectors with compressed air and check if the flame is uniform across the entire grid.
- 03
The flame flickers or goes out by itself a few seconds after being ignited.
Cause: The detection electrode is poorly positioned or dirty and "loses" the flame signal even though it remains lit.
Check the distance and cleanliness of the detection electrode, as well as the condition of the wiring and connectors, before replacing the part.
- 04
The ignition is delayed and a small bang is noticeable when starting.
Cause: Incorrect separation between the ignition electrode and the grid, or dirty injectors that delay the flow of gas.
Check that the electrode does not touch the grid and is not too far away; both ends give a flame error even though the part is not broken.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Baxi Roca burner 122051630
- Catalogue reference
- 122051630
- Uniclima internal SKU
- QMRVIC2020
- Brand
- Roca
- Type of part
- Gas burners
- Units in stock
- 7 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Frequently asked questions about the burner 122051630
Is the burner grid with reference 122051630 compatible with other boiler models?
Does the burner grill of the Baxi Roca Victoria 20/20 F include the electrode box?
How many models are compatible with the burner grid 122051630?
What is the reference for the burner assembly kit of the Baxi Roca Victoria 20/20 F?
Are there documented fault codes for this product?
