Bertelli & Partners PCB for Biasi Minox 24 E - Ref. 430404AFP202
When you turn on the hot water tap or activate the heating, the Bertelli & Partners PCB for Biasi Minox 24 E - Ref. 430404AFP202 is responsible for controlling the ignition, the modulation of the burner, and the operation of the pump. If this part fails, you will notice that the boiler does not start, gets locked, or behaves erratically. It is compatible with models such as Minox 24 E, Minox 28 E, Minox 32 E, among others in the Biasi Minox E range, as well as with some models from Micon and Biasi. It is recommended to replace it when you experience these symptoms.
VAT included
Consult via WhatsAppBiasi boilers compatible with reference BI1305101
PCB with reference BI1305101. Six confirmed compatibilities: Minox 24 E and Minox 28 E.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Biasi Minox 24 E | Biasi Minox E | Contrasted |
| Biasi Minox 28 E | Biasi Minox E | Contrasted |
| Biasi Minox 32 E | Biasi Minox E | Contrasted |
| Biasi Micon 24 E | Biasi Micon | Contrasted |
| Biasi M90.24 CM/B | Biasi M90 | Contrasted |
| Biasi M90.24S | Biasi M90 | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the part number BI1305101 is the one for your boiler.
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference BI1305101. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB BI1305101 resolves.
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The pump or circulator never stops, even when there is no demand for heating.
Cause: A relay on the PCB has stuck and keeps the output active.
Turn off the boiler completely for a couple of minutes and then turn it back on; if it continues to circulate while off, it points to a stuck relay.
- 02
It doesn't turn on and doesn't show any fault code on the display.
Cause: The PCB does not start the ignition cycle due to a fault in its control stage.
Check that the water pressure switch and the safety thermostat are not in cut-off before replacing the PCB.
- 03
The display shows a fault code that comes and goes, it is not constant.
Cause: An internal contact on the PCB is intermittently failing due to moisture or vibration.
Check that all the connectors on the PCB are properly fitted; a loose terminal gives the same symptoms as a damaged board.
- 04
The boiler works but with rare power cuts, as if it loses and recovers power on its own.
Cause: A component on the PCB is intermittently failing during the power supply stage.
Check the electrical installation of the boiler (socket, plug, control panel) before assuming it is the PCB.
Fault codes for Biasi that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| 01E | The boiler does not ignite. | The boiler does not ignite. This may be caused by an issue with the PCB that prevents the ignition from functioning properly. If you have checked the gas supply and the igniter, you may need to inspect the PCB. |
| 06E | The heating NTC sensor is failing. | The heating NTC sensor is failing. If you have checked the sensor and its connection, it is possible that the issue lies with the PCB, which is not processing the information from the sensor correctly. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Biasi PCB BI1305101
- Catalogue reference
- BI1305101
- Brand
- Biasi
- Type of part
- PCBs (control boards)
- Units in stock
- 2 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Manufacturer
- Bertelli & Partners
- Component code
- 430404AFP202
Frequently asked questions about the PCB BI1305101
Is this Bertelli and Partners PCB for Biasi Minox 24 E compatible with other boiler models?
Who manufactures the PCB for the Manaut Minox 24 E?
What code should I look for on my PCB to confirm that it is the one for the Biasi Minox 24 E?
Is this PCB compatible with the Biasi Minox 28 E boiler?
What fault codes are documented for this PCB?
What is the reference for this PCB?
Spare parts related to Biasi Biasi Minox E
