Fagor FEB 24 AR PCB
The Fagor FEB 24 AR PCB is the component that controls the ignition, the modulation of the burner, the pump, and the safety features of the boiler. If it has faults, you will notice that the boiler does not start, gets locked, or behaves erratically, and the fault code F8 may appear, indicating a communication failure between the main circuit and the control circuit. This board is compatible with models from the Ecomini range, such as the FEB 24 AR-1 N and FEB 24 AR-1 B, among others. It is recommended to replace it when these symptoms are detected to restore the proper functioning of the boiler.
VAT included
Consult via WhatsAppFagor boilers compatible with reference N03G014M5
PCB with reference N03G014M5. Six confirmed compatibilities: FEB 24 AR-1 N (912010024) 2009 and FEB 24 AR-1 B (912010025) 2009.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FEB 24 AR-1 N (912010024) 2009 | Fagor Ecomini | Contrasted |
| Fagor FEB 24 AR-1 B (912010025) 2009 | Fagor Ecomini | Contrasted |
| Fagor 1 FEB 24 AR-1 N (934010036) 2011 | Fagor Ecomini | Contrasted |
| Fagor 1 FEB 24 AR-1 B (934010038) 2011 | Fagor Ecomini | Contrasted |
| Fagor 1 FEB 24 AR N (934010035) 2012 | Fagor Ecomini | Contrasted |
| Fagor 1 FEB 24 AR B (934010037) 2012 | Fagor Ecomini | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the part N03G014M5 is the one for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference N03G014M5. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB N03G014M5 resolves.
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler does not turn on and there is no light or sound when pressing the switch.
Cause: The PCB distributes power to the entire unit; if it is not active, nothing will start.
Check the fuse on the PCB at a glance, without liquids or testers, before replacing it.
- 02
A clicking sound is heard when trying to ignite, but the pump or the fan does not start.
Cause: The PCB has relays that supply power to the pump and fan; if a relay does not switch, the component does not receive a command even if the click is heard.
With the boiler off, check that the pump and the fan rotate freely by moving them by hand.
- 03
The transformer on the PCB buzzes more than usual or feels hot to the touch.
Cause: A transformer forced by an internal fault in the PCB can overheat and make noise before it stops working.
With the boiler unplugged, touch the area of the transformer after a brief use to see if it is hotter than usual.
- 04
The boiler operates intermittently: sometimes it starts up properly and other times it does not respond.
Cause: A partial fault in the control electronics causes irregular behaviors depending on the temperature or usage.
Note when it fails (when cold, when hot, after several hours) to determine if it is the PCB or another component.
Fault codes for Fagor that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F8 | Communication fault between the main circuit and the control board circuit. | The N03G014M5 display/control board may fail or lose connection with the main board; check the power supply and 5-way cable between the panel and the main board, and if the issue persists, replace the control board. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Fagor N03G014M5 PCB.
- Catalogue reference
- N03G014M5
- Brand
- Fagor
- Type of part
- PCBs (control boards)
- Units in stock
- 3 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Power supply
- 230V 50Hz
- Relays - manufacturer
- Panasonic
- Transformer - code
- N03A00A45
- Transformer - additional marking
- C48VG01 2513
Frequently asked questions about the PCB N03G014M5
Does the PCB of the Fagor FEB 24 AR have the FAGOR logo screen printed?
What brand of relays is installed on the PCB of the FEB 24 AR?
Does this PCB work for a FEB 24 AR-1 N boiler?
What is the code for the transformer on this Fagor PCB?
Spare parts related to Fagor Fagor Ecomini
