Fagor PCB CE30E1N E.G.O. Control 206 Ref. 7709A05E00
Control PCB for Fagor boilers, with the Fagor logo printed on the circuit. The control module is manufactured by E.G.O. (E.G.O. C.S. adhesive), model CONTROL 206, code 7709A05E00, version HW:08 SW:01 RC. It includes transformer E5419266 (230V 50/60Hz on primary, 14V 12VA on secondary). It is replaced when the boiler does not ignite or does not respond to the controls.
VAT included
Consult via WhatsAppFagor boilers compatible with reference N03G009M8
PCB with reference N03G009M8. 12 verified compatibilities: FE-24E/1 N and FE-24E/1 B.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FE-24E/1 N | FE24E | Contrasted |
| Fagor FE-24E/1 B | FE24E | Contrasted |
| Fagor FE-24E H/1 N | FE24E | Contrasted |
| Fagor FE24EC/1 B | FE24E | Contrasted |
| Fagor FE24EC/1 N | FE24E | Contrasted |
| Fagor CA24E B | CA24E | Contrasted |
| Fagor CA24E N | CA24E | Contrasted |
| Fagor FA23E B | FA23E | Contrasted |
| Fagor FA23E N | FA23E | Contrasted |
| Fagor FE27E/1 B | FE27E | Contrasted |
| Fagor FE27E/1 N | FE27E | Contrasted |
| Fagor FE27ECN/1 N | FE27E | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. N03G009M8 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference N03G009M8. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB N03G009M8 resolves.
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler does not ignite.
Cause: The control board does not send the ignition command to the gas valve and the electrode if any internal component or the transformer fails.
Check if there is power to the PCB and verify that there are no blown fuses before considering it faulty.
- 02
The boiler does not respond to the controls.
Cause: An internal fault in the relays or the microprocessor of the PCB prevents it from responding to the commands, even though they are in good condition.
Check if any LED or indicator on the PCB lights up when moving the controls: if there is no response, the board is not processing the signal.
- 03
Intermittent electronic fault in the ignition
Cause: A cold solder joint or a component that degrades with heat causes the PCB to fail only when it is hot or after a period of operation.
Note whether the fault occurs always when cold, always when hot, or randomly: this pattern helps to confirm if it is the PCB before replacing it.
Fault codes for Fagor that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F5 | Control board fault: internal fault in the electronic circuit causing the boiler to lockout. | It is the code that the FE-24E range displays when the PCB fails internally. Check after ruling out correct power supply and connections: if the F5 persists with correct wiring and sensors, the PCB (N03G009M8) is the cause and should be replaced. |
| F10 | Fault in the control or closure of the gas valve; cannot be unlocked. | Sources document that the origin may be the control circuit (the PCB) OR the gas valve itself. Verify by measuring the signal/power supply that the PCB sends to the valve: if the PCB does not correctly control the valve (signal absent or incorrect with a healthy valve), the PCB N03G009M8 is the cause. Shared cause, not exclusive to the PCB. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Fagor N03G009M8 PCB.
- Catalogue reference
- N03G009M8
- Brand
- Fagor
- Type of part
- PCBs (control boards)
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Manufacturer of the control module
- E.G.O.
- Control board code
- 7709A05E00
- Control board model
- CONTROL 206
- Hardware/software version
- HW:08 SW:01 RC
- Transformer model
- E5419266
- Primary transformer voltage
- 230V 50/60Hz
- Primary current transformer
- 80mA/T
- Secondary transformer voltage
- 14V 12VA
Frequently asked questions about the PCB N03G009M8
Is this CE30E1N an original Fagor PCB?
What is the code for this E.G.O. Control 206 PCB?
Does this PCB work for the Fagor FE24E?
What transformer is included with this Fagor CE30E1N PCB?
When should this Fagor CE30E1N PCB be replaced?
Spare parts related to Fagor FE24E
