Ignition Module for Habitat 23 E Boiler and Other Models Ref. 052002490

Ignition Module for Habitat 23 E Boiler and Other Models Ref. 052002490

Stock · 1 unit

If your boiler does not start, gets blocked, or shows erratic behavior, you may need the Ignition Module for the Habitat 23 E boiler and other models. This PCB (control board) manages the ignition, burner modulation, pump, and safety features of the boiler. It is installed in models such as Supermicra 24 SE, Supermicra 28 E, and Supermaster 24 SE, among others. It is advisable to replace it upon noticing these symptoms to avoid larger issues.

VAT included

Compatibility

Renova boilers compatible with reference 052002490

PCB with reference 052002490. Eight confirmed compatibilities: Supermicra 24 SE and Supermicra 28 E.

Proven compatibility

Boiler modelFamilyVerification
Renova Supermicra 24 SESupermicraContrasted
Renova Supermicra 28 ESupermicraContrasted
Renova Supermicra 30 SESupermicraContrasted
Renova Supermicra 23 ESupermicraContrasted
Renova Supermaster 24 SESupermasterContrasted
Renova Supermaster 23 ESupermasterContrasted
Renova Supermaster 28 ESupermasterContrasted
Renova Supermaster 30 SESupermasterContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the part number 052002490 is the correct one for your boiler.

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 052002490. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB 052002490 resolves.

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler does not ignite the burner and there is not even an attempt to spark.

    Cause: The ignition module is not functioning, so it does not generate a spark at the electrode.

    Check if there is power at the 4-pin connector of the module before considering it faulty.

  • 02

    The boiler starts, the spark is heard, and it immediately locks out requesting a reset.

    Cause: The module does not detect the flame in time and cuts off the gas supply for safety.

    Observe whether the blockage occurs in the same way each time or if it varies: an irregular pattern suggests a problem in the module rather than in the mechanical valve.

  • 03

    Weak spark, with crackling, or that cuts off before igniting the burner.

    Cause: The module has lost power and cannot maintain a strong spark to ignite.

    Before changing the module, clean the electrode and check that the distance between the tips has not increased due to use.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the PCB Renova 052002490

Catalogue reference
052002490
Brand
Renova
Type of part
PCBs (control boards)
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days
Documentation

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

Frequently Asked Questions

Frequently asked questions about the PCB 052002490

Is this ignition module MECS24SE compatible with the Habitat 23 E boiler?
Yes, the ignition module MECS24SE is compatible with the Habitat 23 E boiler, as it is on the list of confirmed models.
Is this module compatible with a Supermicra 23 E?
Yes, the ignition module MECS24SE is compatible with the Supermicra 23 E.
What is the physical appearance of the MECS24SE ignition module?
The MECS24SE ignition module has a blue casing and a 4-pin connector.
When should the ignition module be replaced in a Supermaster 24 SE?
It should be replaced when the boiler does not ignite or gets locked during startup.
How many models are compatible with the ignition module MECS24SE?
The ignition module MECS24SE is compatible with a total of 8 models.
What fault codes are documented for the ignition module MECS24SE?
There are no documented fault codes for this product.

Spare parts related to Renova Supermicra

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Ignition Module for Habitat 23 E Boiler and Other Models Ref. 052002490