Circulating Pump for Fagor Boiler FEB-20E
RefurbishedFagorPumpsGrundfos

Circulating Pump for Fagor Boiler FEB-20E

Stock · 4 units

The Fagor Eco Plus range boilers, among others, use the Fagor FEB-20E Circulating Pump, which is responsible for moving water through the heating circuit. When this pump fails, you may notice cold radiators, strange noises, overheating, or blockages due to a lack of water circulation. It is compatible with models such as FEB-20E, FEB-20E/1, FE-20E, FE-20E/1, CE-20E, and CE-20E/1. It is recommended to replace the pump when these symptoms occur to avoid further issues.

VAT included

Compatibility

Fagor boilers compatible with reference N47G000M1

Circulating pump with reference N47G000M1. 12 verified compatibilities: FEB-20E and FEB-20E/1.

Proven compatibility

Boiler modelFamilyVerification
Fagor FEB-20EEco Plus (FEB)Contrasted
Fagor FEB-20E/1Eco Plus (FEB)Contrasted
Fagor FE-20EEco Compact / FE (FE)Contrasted
Fagor FE-20E/1Eco Compact / FE (FE)Contrasted
Fagor CE-20EContract (CE)Contrasted
Fagor CE-20E/1Contract (CE)Contrasted
Fagor FA-20FAContrasted
Fagor FA-20 NFAContrasted
Fagor CA-20CAContrasted
Fagor CA-20 NCAContrasted
Fagor FEE-20FEEContrasted
Fagor FEE-20/1FEEContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. N47G000M1 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference N47G000M1. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the circulation pump N47G000M1 resolves.

The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler is working but heats less than normal, or does not heat at all.

    Cause: The pump is not circulating the water properly.

    Change the speed on the pump selector: if it improves in another position, the problem may be electrical.

  • 02

    The radiators are cold even though the boiler seems to be on.

    Cause: The circulator is not pushing the hot water.

    Check if the pump makes noise without turning: it could be a blocked rotor.

  • 03

    Noise when changing speed on the pump.

    Cause: There may be air in the circuit or the rotor is worn in that position.

    Bleed the circuit and test the three speeds separately before considering that the pump is faulty.

  • 04

    The pump does not start after a period of not using the heating.

    Cause: The rotor can become stuck if it is not used for a long time.

    Look for the manual release screw on the front and check if the shaft turns with a screwdriver before replacing it.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Fagor N47G000M1 circulation pump.

Catalogue reference
N47G000M1
Brand
Fagor
Type of part
Pumps
Units in stock
4 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

voltage
230V~
frequency
50Hz
capacitor
2µF
protection
IP44
Thermal class
TF95 / Class H
Max pressure
3 bar
Speed 1
0.20A / 45W
Speed 2
0.31A / 70W
Speed 3
0.41A / 95W
Frequently Asked Questions

Frequently asked questions about the circulator pump N47G000M1

Is this pump suitable for my boiler Fagor FE-20E?
Yes, the Fagor FE-20E is on the list of compatible boilers, along with FEB-20E, FEB-20E/1, CA-20, CA-20 N, CE-20E, CE-20E/1, FA-20, FA-20 N, FEE-20, and FEE-20/1.
How many speeds does the pump of the Fagor FEB-20E have?
Three: 0.20A/45W, 0.31A/70W, and 0.41A/95W, all at 230V/50Hz.
Why is the pump of the Fagor FEB-20E replaced?
It is replaced when the boiler does not heat or stops circulating the water.
What is the reference for the circulation pump for the Fagor FEB-20E boiler?
The reference for the pump is BFEB20E.
How many models are compatible with the BFEB20E pump?
A total of 12 models are compatible with the BFEB20E pump.
What fault codes does the circulator pump BFEB20E have?
There are no documented fault codes.

Spare parts related to Fagor Eco Plus (FEB)

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Circulating Pump for Fagor Boiler FEB-20E