Circulating Pump for Fagor Boiler FEB-20E
The Fagor boilers from the Eco Plus range, among others, use the Fagor FEB-20E Circulating Pump, which is responsible for moving water through the heating circuit. When this pump fails, you may notice cold radiators, strange noises, overheating, or blockages due to a lack of water circulation. It is compatible with models such as FEB-20E, FEB-20E/1, FE-20E, FE-20E/1, CE-20E, and CE-20E/1. A technician must confirm through diagnosis whether it is necessary to replace the pump when these symptoms occur to avoid further issues.
- Type of part
- Pumps
- Status
- Refurbished
- Catalogue reference
- N47G000M1
- Warranty
- 1 year
Fagor boilers compatible with reference N47G000M1
Circulating pump with reference N47G000M1. 12 verified compatibilities: FEB-20E and FEB-20E/1.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FEB-20E | Eco Plus (FEB) | Contrasted |
| Fagor FEB-20E/1 | Eco Plus (FEB) | Contrasted |
| Fagor FE-20E | Eco Compact / FE (FE) | Contrasted |
| Fagor FE-20E/1 | Eco Compact / FE (FE) | Contrasted |
| Fagor CE-20E | Contract (CE) | Contrasted |
| Fagor CE-20E/1 | Contract (CE) | Contrasted |
| Fagor FA-20 | FA | Contrasted |
| Fagor FA-20 N | FA | Contrasted |
| Fagor CA-20 | CA | Contrasted |
| Fagor CA-20 N | CA | Contrasted |
| Fagor FEE-20 | FEE | Contrasted |
| Fagor FEE-20/1 | FEE | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. N47G000M1 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference N47G000M1. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the circulator pump N47G000M1
The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler is working but heats less than normal, or does not heat at all.
Cause: The pump is not circulating the water properly.
Change the speed on the pump selector: if it improves in another position, the problem may be electrical.
- 02
The radiators are cold even though the boiler seems to be on.
Cause: The circulator is not pushing the hot water.
Check if the pump makes noise without turning: it could be a blocked rotor.
- 03
Noise when changing speed on the pump.
Cause: There may be air in the circuit or the rotor is worn in that position.
Bleed the circuit and test the three speeds separately before considering that the pump is faulty.
- 04
The pump does not start after a period of not using the heating.
Cause: The rotor can become stuck if it is not used for a long time.
Look for the manual release screw on the front and check if the shaft turns with a screwdriver before replacing it.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Fagor N47G000M1 circulation pump.
- Catalogue reference
- N47G000M1
- Uniclima internal SKU
- BFEB20E
- Brand
- Fagor
- Type of part
- Pumps
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- voltage
- 230V~
- frequency
- 50Hz
- capacitor
- 2µF
- protection
- IP44
- Thermal class
- TF95 / Class H
- Max pressure
- 3 bar
- Speed 1
- 0.20A / 45W
- Speed 2
- 0.31A / 70W
- Speed 3
- 0.41A / 95W
Frequently asked questions about the circulator pump N47G000M1
Is this pump suitable for my boiler Fagor FE-20E?
How many speeds does the pump of the Fagor FEB-20E have?
Why is the pump of the Fagor FEB-20E replaced?
What is the reference for the circulation pump for the Fagor FEB-20E boiler?
How many models are compatible with the BFEB20E pump?
What fault codes does the circulator pump BFEB20E have?
Spare parts related to Fagor Eco Plus (FEB)
