Wilo Circulating Pump HB15/7-3 For Saunier Duval Isofast F 30 E H-MOD - Ref. S1024100
RefurbishedSaunier DuvalPumpsWilo

Wilo Circulating Pump HB15/7-3 For Saunier Duval Isofast F 30 E H-MOD - Ref. S1024100

Wilo circulator pump model HB15/7-3 that moves the water of the heating/DOMESTIC HOT WATER circuit of the boiler. It operates at three selectable speeds (2000, 2360, and 2600 min-1). The change requires first confirming the fault of the part through technical diagnosis, even when it does not start, makes noise, leaks, or the boiler does not heat despite the burner functioning normally.

Type of part
Pumps
Status
Refurbished
Catalogue reference
S1024100
Warranty
1 year
VAT includedStock · 5 units
Compatibility

Saunier Duval boilers compatible with reference S1024100

Circulating pump with reference S1024100. A proven compatibility: Isofast F 30 E H-MOD.

Proven compatibility

Boiler modelFamilyVerification
Saunier Duval Isofast F 30 E H-MODIsofastContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. S1024100 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference S1024100. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms that require diagnosis in the circulator pump S1024100

The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The burner ignites and operates normally, but the heating does not warm up.

    Cause: If this pump does not circulate water, the heat generated will not reach the radiators even if the combustion is correct.

    Touch the pump body with the boiler running: if you don't feel any vibration or heat, it's not spinning.

  • 02

    The pump vibrates or makes a noise different from the normal operating hum.

    Cause: With three selectable speeds, an imbalance in the impeller due to air or lime is more noticeable as vibration at higher speeds.

    Bleed the air from the circuit and test the three positions of the selector before considering the pump as faulty.

  • 03

    Water is leaking from the pump body, near where it connects to the motor.

    Cause: The shaft seal wears out over the years and starts to let water through gradually.

    Dry the area and check after a heating cycle if the moisture reappears right there.

  • 04

    The pump is completely blocked, it doesn't turn even though it receives power.

    Cause: The shaft seizes if the pump has been idle for a long time, something common after the summer.

    Locate the bleed screw in the center of the motor and turn it with a flathead screwdriver to try to free the shaft.

Fault codes Saunier Duval that require diagnosis

CodeFaultTechnical checks
11Pump (circulator) lockout.The pump motor is blocked or not rotating, so there is no circulation and the boiler displays 11; check by removing the rotor cap to turn/unblock it and verify 230 V supply at the pump terminals.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Saunier Duval S1024100 circulation pump.

Catalogue reference
S1024100
Uniclima internal SKU
BCCIF30EHMOD
Brand
Saunier Duval
Type of part
Pumps
Units in stock
5 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Manufacturer
Wilo
Model
HB15/7-3
Part reference
4515543
Capacitor / insulation voltage
3.5µF - 400VDB
Voltage/frequency
~230V-50Hz
Thermal class
Class F - TF95
Degree of protection
IP44 (PN3)
Speeds (rpm / A / W)
III: 2600 min-1, 0.52A, 118W | II: 2360 min-1, 0.40A, 86W | I: 2000 min-1, 0.27A, 58W
Place of manufacture
Made in EU
Frequently Asked Questions

Frequently asked questions about the circulator pump S1024100

What brand and model is the pump of the Isofast F 30 E H-MOD?
Wilo HB15/7-3, according to the label on the part itself.
What reference do I need to order for the pump of the Isofast F 30 E H-MOD?
BCCIF30EHMOD, which corresponds to the model HB15/7-3.
How many speeds does the HB15/7-3 pump operate at?
With three selectable speeds: 2000, 2360, and 2600 min-1, each with a different consumption.
Is the pump of the Isofast F 30 E H-MOD an original Saunier Duval part?
The actual manufacturer is Wilo, model HB15/7-3; Saunier Duval installs it from the factory in the Isofast F 30 E H-MOD.
When should the pump of the Isofast F 30 E H-MOD be replaced?
The technical diagnosis must confirm that it is necessary to replace it, even when it does not start, makes noise, leaks, or the boiler does not heat despite the burner operating normally.
How many models are compatible with the Wilo HB15/7-3 pump?
There is only one confirmed model: Isofast F 30 E H-MOD.

Spare parts related to Saunier Duval Isofast

Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Wilo Circulating Pump HB15/7-3 For Saunier Duval Isofast F 30 E H-MOD - Ref. S1024100