Ineco Ferroli Elite Type 697250-64 Ignition Transformer
Ignition transformer for Ferroli Elite boiler. Manufactured by Ineco S.r.l. (Italy), according to the piece's labeling: Type 697250-64, 220-240 V at 50/60 Hz, 0.7 VA (printed 07VA), thermal class T80. It is part of the ignition circuit; it is replaced when the burner does not ignite and the electrode or the control unit is ruled out.
VAT included
Consult via WhatsAppFerroli boilers compatible with reference I36701940
Ignition transformer with reference I36701940. A verified compatibility: N.E.112.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Ferroli N.E.112 | Ferroli New Elite (N.E.) | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. I36701940 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference I36701940. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the ignition transformer I36701940 resolves.
The ignition transformer generates the high voltage for the spark of the electrodes. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The burner of the boiler does not ignite on any attempt.
Cause: The transformer generates the high voltage necessary to create the spark; if it doesn't, the gas does not ignite.
Before replacing it, check that the electrode and the control board have no damage or connection faults.
- 02
There is no visible or audible spark when trying to ignite the boiler.
Cause: If the transformer does not provide output voltage, the electric arc is not generated at the electrode.
Make sure that the high voltage cable connectors are properly connected at both ends before replacing the part.
- 03
The boiler locks out after several ignition attempts without achieving a flame.
Cause: The control unit stops the cycle for safety if it does not detect flame ionization after the programmed attempts.
Check if the blockage occurs in the same way each time; a consistent pattern suggests a faulty transformer rather than an intermittent fault.
Fault codes for Ferroli that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| A01 | Burner lockout (ignition fault). | If the ignition transformer is faulty, no spark is generated and the burner does not ignite. Check for the absence of spark at the electrodes and inspect the transformer (primary supply and high voltage output) or replace it for testing. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Ferroli Ignition Transformer Datasheet I36701940
- Catalogue reference
- I36701940
- Brand
- Ferroli
- Type of part
- Transformers
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- manufacturer
- Ineco S.r.l. (Italy)
- type (code)
- 697250-64
- voltage
- 220-240 V, 50/60 Hz
- power
- 0.7 VA (printed 07VA)
- Temperature class
- T80
- The actual manufacturer of the part is Ineco (Italy), different from the boiler brand (Ferroli); it is not an original Ferroli part.
- The same Type 697250-64 code also appears on datasheets for transformers for Fagor MF 12 N / FEE20E/EIN; no functional equivalence is claimed, only that they share the same manufacturer and type.
Frequently asked questions about the ignition transformer I36701940
Is it an original Ferroli part?
Which reference should I look for on the label of my transformer to confirm that it is the one for the Ferroli Elite?
What voltage does the transformer of the Ferroli Elite operate at?
When should the ignition transformer of the Ferroli Elite be replaced?
Spare parts related to Ferroli Ferroli New Elite (N.E.)
