Bithermal Heat Exchanger Fagor Contract CA 20 En Ref. ST0028026
- For 8 Fagor boilers Fagor Contract CE and Fagor FA-20
- Check for: The domestic hot water comes out intermittently, alternating between hot and cold with the tap in the same position, The heating works, but the domestic hot water is barely hot
- Out of stock for now: we will notify you when it is back
- Returns within 14 days, spare part not installed
- Inspected and tested, warranty 1 year
Is it compatible with your boiler?
Fagor boilers compatible with reference ST0028026
- CE-20E/1 NFagor Contract CE
- CA-20E NFagor Contract CE
- FA-20 NFagor FA-20
- FA-15/20 NFagor FA-20
- FA-20E NFagor FA-20
- FA-20E2 H NFagor FA-20
- FA-20 F LPGFagor FA-20
- FEB-20EF/1NFagor FEB / Ecoplus
Can’t see your model? The printed reference takes priority. How to check it or send us a photo on WhatsApp.
How to check if Ref. ST0028026 is the spare part for your boiler
-
Read the reference on your bithermal heat exchanger
It must show ST0028026 on the label or the screen print. If it is not legible, do not work it out from its shape.
-
Find the model of your boiler
It is on the rating plate. Look it up in the compatible list.
-
Compare connections and body
With the original spare part, before fitting.
-
If you are unsure, send us a photo
For the screen print: we will confirm it with you before you buy.
Send photo via WhatsApp
Symptoms that require diagnosis on this spare part (bithermal heat exchanger ST0028026)
The domestic hot water comes out intermittently, alternating between hot and cold with the tap in the same position
- Cause
- Limescale accumulates unevenly in the bivalent heat exchanger and causes the temperature sensor to fluctuate
- What to do
- First, check the pressure and flow at the tap: a very low flow produces the same effect without it being the heat exchanger
The heating works, but the domestic hot water is barely hot
- Cause
- The domestic hot water circuit gets clogged with scale before the heating circuit.
- What to do
- Check the water hardness and if a water softener is installed before replacing the part
The pressure in the heating circuit rises or falls without explanation, and water needs to be replenished frequently
- Cause
- An internal perforation of the bithermal heat exchanger connects the heating circuit with the domestic water circuit
- What to do
- Close the filling valve for a few days and check if the pressure remains stable before taking any action
A boiling or bubbling noise is heard inside the boiler when requesting domestic hot water
- Cause
- The lime scale accumulated in the bithermal heat exchanger creates localized hot spots that cause the water to boil
- What to do
- Check if the noise occurs only when you open the hot water tap: that points to the heat exchanger rather than other parts
Electrical work and opening the boiler are jobs for a technician. Repair and diagnosis
Technical sheet: bithermal heat exchanger Fagor ST0028026
The Fagor Contract CA 20 double heat exchanger heats both the heating circuit and the domestic hot water simultaneously in a single unit. When it fails, you may notice that the water comes out lukewarm, experience temperature fluctuations, or even a mixing of circuits. This model is compatible with several boilers from the Fagor Contract CE range, Fagor FA-20, and Fagor FEB / Ecoplus, among others. A technician should confirm through diagnosis whether it needs to be replaced when these symptoms occur to maintain the performance of your heating and hot water system.
Frequently asked questions about the spare part bithermal heat exchanger Fagor ST0028026
Can I use this heat exchanger in my Fagor CA-20E N boiler?
Yes, the CA-20E N is on the list of compatible models, along with CE-20E/1 N, FA-15/20 N, FA-20 N, FA-20E N, FA-20E2 H N, FA-20 F GLP, and FEB-20EF/1N.
Is this heat exchanger also suitable for the Fagor FA-20E2 H N?
Yes, the FA-20E2 H N is among the compatible models listed.
How do I know if this spare part (bithermal heat exchanger) ST0028026 is the right one for my Fagor boiler?
Look at the reference printed on the installed spare part (bithermal heat exchanger): it should read ST0028026. Then check the model on your boiler’s rating plate. This spare part (bithermal heat exchanger) has eight verified compatibilities, in the families Fagor Contract CE, Fagor FA-20 and Fagor FEB / Ecoplus. If you cannot find the reference or your model is not on the list, send us a photo via WhatsApp and we will confirm it before you buy.
What does it mean that this spare part (bithermal heat exchanger) is reconditioned?
That it is not a new spare part: it is sold inspected and tested, with a 1-year warranty. If in the end you do not install it, you have 14 days to return it.
How much does shipping cost and how long does it take to arrive?
TIPSA shipping: 24/48 working hours to mainland Spain and 2–6 working days to the EU, depending on the country. No shipping to the Balearic or Canary Islands, Ceuta or Melilla.
The exact cost appears in your cart before you pay. Check delivery times and shipping rates by country.
Can I return it if it turns out not to be the right spare part for me?
Yes. You have 14 calendar days from when you receive it to return this spare part bithermal heat exchanger, provided it is uninstalled, unused and in its original packaging. The return shipping is at your expense, unless the error was ours or the spare part arrives faulty.
The exception is electronic boards and electronic components, for which returns are not accepted: they are inspected and prepared for a specific appliance and, once connected, their condition cannot be checked. Read the returns policy.
Out of stock. How will I know when it is back in stock?
Click “Book” and leave your email: we will contact you as soon as a unit is available. Signing up is free of charge.