Vaillant VCW 180 XE Control PCB

Vaillant VCW 180 XE Control PCB

Stock · 1 unit

In Vaillant boilers from the Thermocompact range, the control PCB VCW 180 XE is responsible for managing the ignition, burner modulation, pump, and safety features. If this part fails, the boiler may not start, may lock out, or may exhibit erratic behavior. It is compatible with several models, such as the VCW 240 XE, VCW 280 XE, VCW 180 K XE, among others. It is recommended to replace it if you experience these symptoms.

VAT included

Compatibility

Vaillant boilers compatible with reference 130312

PCB with reference 130312. Nine confirmed compatibilities: VCW 180 XE and VCW 240 XE.

Proven compatibility

Boiler modelFamilyVerification
Vaillant VCW 180 XEThermocompact / Tecnoblock VCW XEContrasted
Vaillant VCW 240 XEThermocompact / Tecnoblock VCW XEContrasted
Vaillant VCW 280 XEThermocompact / Tecnoblock VCW XEContrasted
Vaillant VCW 180 K XEThermocompact / Tecnoblock VCW XEContrasted
Vaillant VCW 182 EThermocompact / Tecnoblock VCW EContrasted
Vaillant VCW 242 EThermocompact / Tecnoblock VCW EContrasted
Vaillant VCW 282 EThermocompact / Tecnoblock VCW EContrasted
Vaillant VCW 185 EThermocompact / Tecnoblock VCW EContrasted
Vaillant VCW 245 EThermocompact / Tecnoblock VCW EContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 130312 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 130312. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB 130312 resolves.

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler does not turn on when the switch on the PCB is activated.

    Cause: The switch is part of the PCB and cuts off or allows the power supply to the entire electronics.

    Measure the continuity of the switch with a multimeter in both positions before considering the PCB as faulty.

  • 02

    The red indicator on the PCB never lights up, not even when power is supplied.

    Cause: That indicator shows that the PCB is receiving power; if it does not light up, the PCB is not receiving voltage or the indicator is faulty.

    Check that there is mains voltage at the input terminals of the PCB before replacing it.

  • 03

    The boiler responds erratically: sometimes it turns on and sometimes it doesn't, with the switch in the same position.

    Cause: A damaged contact in the switch or on the PCB causes the power supply to be intermittent.

    Move the switch several times and observe the indicator light: if it blinks when you move it, the fault is in the switch and not in the entire PCB.

  • 04

    General control failure: the boiler is not heating water or heating, and there is no visible indication of a fault.

    Cause: This PCB controls everything electrically for the model; an internal fault renders the boiler completely inactive.

    Check the differential and the main fuse of the installation before replacing the PCB: an external cut can cause the same symptom.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Vaillant 130312 PCB.

Catalogue reference
130312
Brand
Vaillant
Type of part
PCBs (control boards)
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Power supply connection
N L1 L2 / N L, 220-240V
Date code
38/88
Documentation

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

Frequently Asked Questions

Frequently asked questions about the PCB 130312

Is this PCB with reference 130312 an original Vaillant PCB for the VCW 180 XE?
Yes, it has the Vaillant logo printed on the circuit.
The number 130312 does not appear on my Vaillant PCB, is it the part I need for the VCW 240 XE?
Check that one of the printed numbers 130282, 130283, 130302, 130303, 130308, or 130309 appears; 130312 does not match any read directly on the PCB.
Is this PCB suitable for the Vaillant VCW 282 E?
Yes, it is on the list of compatible boilers along with VCW 180 K XE, 180 XE, 182 E, 184 XE, 185 E, 240 XE, 242 E, 244 XE, 245 E, and 280 XE.
What voltage is the PCB of the VCW 185 E connected to?
The wiring is N L1 L2 / N L at 220-240V, as indicated on the terminal block.

Spare parts related to Vaillant Thermocompact / Tecnoblock VCW E

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Vaillant VCW 180 XE Control PCB