Pressure Gauge for Maya 24 CF Boiler and Other Series - Ref. 61303159

Pressure Gauge for Maya 24 CF Boiler and Other Series - Ref. 61303159

Stock · 1 unit

If you notice that the boiler does not regulate the temperature properly or gets blocked due to lack of pressure, you may need the pressure gauge for the Maya 24 CF boiler and other series - Ref. 61303159 from Chaffoteaux. This pressure gauge measures and controls the circuit pressure, ensuring proper operation. When it fails, it can provide incorrect readings that affect the boiler's performance. It is compatible with models such as Maya 24 CF, Maya 24 FF, Maya 28 FF, among others from the Calydra Comfort and Elexia Comfort ranges. It is recommended to replace it upon detecting these symptoms to avoid further issues.

VAT included

Compatibility

Chaffoteaux boilers compatible with reference 61303159

Pressure gauge with reference 61303159. Nine confirmed compatibilities: Calydra Comfort 24 CF and Calydra Comfort 24 FF.

Proven compatibility

Boiler modelFamilyVerification
Chaffoteaux Calydra Comfort 24 CFCalydra ComfortContrasted
Chaffoteaux Calydra Comfort 24 FFCalydra ComfortContrasted
Chaffoteaux Calydra Comfort 28 CFCalydra ComfortContrasted
Chaffoteaux Calydra Comfort 28 FFCalydra ComfortContrasted
Chaffoteaux Elexia Comfort 24 CFElexia ComfortContrasted
Chaffoteaux Elexia Comfort 24 FFElexia ComfortContrasted
Chaffoteaux Maya 24 CFMayaContrasted
Chaffoteaux Maya 24 FFMayaContrasted
Chaffoteaux Maya 28 FFMayaContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 61303159 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 61303159. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the manometer 61303159 resolves.

The manometer shows the pressure of the boiler circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The manometer does not show pressure even though you know that the boiler is full of water.

    Cause: The internal mechanism gets stuck, usually due to the accumulation of limescale, and does not transmit the actual pressure to the needle.

    Refill the pressure using the filling key and check if the needle moves; if it doesn't, the problem may be with the pressure gauge.

  • 02

    The needle is fixed and does not move either when bleeding radiators or when repressurizing.

    Cause: The mechanism gets stuck over time, especially if the boiler has not received recent maintenance.

    Gently tap the glass with your finger, as is done with traditional manometers, and see if the needle responds.

  • 03

    The gauge has cracks, is fogged up, or the pressure reading is difficult to see.

    Cause: The glass seal is deteriorating and allowing moisture to enter the pressure gauge.

    Check for condensation droplets inside the glass; verify if the casing has lost its tightness.

  • 04

    The needle is approaching the red zone of the gauge without you having adjusted the circuit pressure.

    Cause: Over time, the internal spring becomes misaligned and shows higher readings than what it actually is, even though the circuit is in stable conditions.

    Compare with the usual pressure of your installation before changing the pressure gauge; if the rest of the system is working well, it could just be a calibration issue.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for Chaffoteaux pressure gauge 61303159

Catalogue reference
61303159
Brand
Chaffoteaux
Type of part
Pressure gauges & aquastats
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days
Frequently Asked Questions

Frequently asked questions about the pressure gauge 61303159

Does this manometer work for the Maya 24 CF?
Yes, the pressure gauge for the Maya 24 CF boiler and other series – Ref. 61303159 is compatible with the Maya 24 CF.
Is it compatible with the Calydra Comfort 28 FF?
Yes, this manometer is compatible with the Calydra Comfort 28 FF.
Can I use this manometer on the Elexia Comfort 24 FF?
Yes, the pressure gauge is compatible with the Elexia Comfort 24 FF.
How many models are compatible with this manometer?
This manometer is compatible with a total of 9 boiler models.
What is the reference for this manometer?
The reference for this manometer is MPCEC24CF.
Are there documented fault codes for this product?
No, there are no documented fault codes for this pressure gauge.

Spare parts related to Chaffoteaux Calydra Comfort

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Pressure Gauge for Maya 24 CF Boiler and Other Series - Ref. 61303159