Chaffoteaux Boiler Extractor Fan MC FF (Nectra, Calydra, Elexia)

Chaffoteaux Boiler Extractor Fan MC FF (Nectra, Calydra, Elexia)

The extractor fan of the Chaffoteaux MC FF boiler (Nectra, Calydra, Elexia) is a component that expels combustion gases and allows the boiler to start. If this part fails, you will notice that the boiler does not ignite or gets locked due to the lack of smoke evacuation. This fan is compatible with models from the Nectra, Calydra, and Elexia ranges, among others. It is recommended to replace it when you experience ignition problems or locking due to smoke evacuation.

Type of part
Extractor fans
Catalogue reference
61010212
Warranty
1 year
VAT included Stock · 7 units
Compatibility

Chaffoteaux boilers compatible with reference 61010212

Extractor with reference 61010212. 11 confirmed compatibilities: Nectra 1.23 FF and Nectra 2.23 FF.

Proven compatibility

Boiler modelFamilyVerification
Chaffoteaux Nectra 1.23 FFNectraContrasted
Chaffoteaux Nectra 2.23 FFNectraContrasted
Chaffoteaux Nectra 3.23 FFNectraContrasted
Chaffoteaux Nectra C 2.23 FFNectraContrasted
Chaffoteaux Nectra Top 2.23 FFNectraContrasted
Chaffoteaux Nectra Top 3.23 FFNectraContrasted
Chaffoteaux Calydra 23 FFCalydraContrasted
Chaffoteaux Elexia 2.23 FFElexiaContrasted
Chaffoteaux Elexia II 2.23 FFElexiaContrasted
Chaffoteaux Hyxia 23 FFHyxiaContrasted
Chaffoteaux G 23 E FFG23EContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 61010212 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 61010212. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms that require diagnosis in the extractor 61010212

The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler tries to ignite, you hear a clicking or buzzing sound, and it locks out without the flame starting.

    Cause: If the extractor does not spin or does not reach the necessary speed, the control unit does not detect the correct draft and cuts off the ignition for safety.

    With the boiler off, manually turn the extractor rotor if accessible: if it is difficult to turn or does not turn smoothly, the fault is in the fan.

  • 02

    A rubbing noise, whistle, or loud vibration is heard when the fan is running.

    Cause: The motor bearings wear out over time or the blades accumulate dirt and lose balance.

    Listen to see if the noise changes when you gently touch the casing of the extractor with the boiler on; if it vibrates much more than normal, focus on the fan before considering any other part.

  • 03

    The boiler locks out with a warning related to the draft or flue gas evacuation.

    Cause: Without the airflow provided by the extractor, the associated pressure switch does not close, and the control board interprets that there is no safe flue.

    Check that the flue pipe is not blocked by snow, leaves, or a nest, as the symptom is identical to that of a faulty extractor.

  • 04

    The fan takes a long time to start, starts with jerks, or stops on its own after a few seconds.

    Cause: A damaged motor winding or a weak start capacitor does not provide enough torque to maintain stable rotation.

    Check that the boiler is receiving stable power and that there are no other devices causing a power drop when the heating is started.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Chaffoteaux 61010212 fan datasheet

Catalogue reference
61010212
Uniclima internal SKU
VCCMCFF
Brand
Chaffoteaux
Type of part
Extractor fans
Units in stock
7 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Voltage and frequency
230/240V AC 50Hz
Power
52W
Insulation class
C1H (probable class H, characters not clear)
Documentation

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

Frequently Asked Questions

Frequently asked questions about the extractor 61010212

Does this extractor fan work for the Chaffoteaux Nectra 2.23 FF boiler?
Yes, the Nectra 2.23 FF is on the list of boilers compatible with the VCCMCFF extraction fan.
Is the same extractor compatible with the Chaffoteaux Elexia 2.23 FF?
Yes, the Elexia 2.23 FF is one of the models compatible with the VCCMCFF extraction fan.
What is the power of the fan in the Chaffoteaux Nectra Top 2.23 FF?
The extractor has a power of 52 W at 230/240 V and 50 Hz, according to the part label.
How many boiler models are compatible with the VCCMCFF exhaust fan?
The VCCMCFF extractor fan is compatible with a total of 11 boiler models.
Is this extractor suitable for the Chaffoteaux Calydra 23 FF boiler?
Yes, the Calydra 23 FF is included in the list of boilers compatible with the VCCMCFF extraction fan.

Spare parts related to Chaffoteaux Nectra

Entrega calculada por destino Delivery time shown at checkout
1-year warranty reviewed and tested
14-day return uninstalled parts
Technical support we verify your model
Chaffoteaux Boiler Extractor Fan MC FF (Nectra, Calydra, Elexia)