Ebm-papst Extractor NRG118/0800-3612-030231 Baxi Roca Neodens Plus 28/28F Ref. 125057000
ebm-papst flue extractor, manufactured in Germany, installed in Baxi Neodens Plus 28/28F boilers and other models from the Neodens Plus and Platinum ranges. It expels the combustion gases from the boiler. The replacement requires first confirming the fault of the part through technical diagnosis, even when the boiler locks due to extraction failure, the extractor makes noise, vibrates, or does not start.
- Type of part
- Extractor fans
- Status
- Refurbished
- Catalogue reference
- 125057000
- Warranty
- 1 year
Baxi boilers compatible with reference 125057000
Extractor with reference 125057000. Three confirmed compatibilities: Neodens Plus 24/24 F and Neodens Plus Eco 24/24 F.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Baxi Neodens Plus 24/24 F | Neodens Plus | Contrasted |
| Baxi Neodens Plus Eco 24/24 F | Neodens Plus | Contrasted |
| Baxi Platinum Compact 24/24 F | Platinum Compact | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 125057000 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 125057000. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the extractor 125057000
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler is locking out and the burner does not ignite due to a fault in the flue gas extraction.
Cause: The extractor does not spin enough for the pressure switch to detect it and allow ignition.
Check that the exhaust duct to the outside is free of obstructions such as nests, ice, or dirt.
- 02
The extractor makes more noise or vibrations than usual while operating.
Cause: The motor bearing is worn out, causing friction or imbalance in the rotation.
Compare the noise to that of a cold start; if it worsens progressively, it is a sign of mechanical wear.
- 03
The extractor does not start or takes a long time to do so when the boiler needs heat.
Cause: The motor loses starting power due to internal wear or accumulated dirt in the impeller.
Make several attempts to start; if it starts on the second or third try, it is indicative of wear.
- 04
The boiler does not ignite the burner because it does not detect the rotation of the fan.
Cause: Without the confirmation from the air pressure switch, the control board does not open the gas valve for safety reasons.
Check that the silicone tubes of the air pressure switch are properly connected, without cracks or pinches.
Baxi fault codes that require diagnosis
| Code | Fault | Technical checks |
|---|---|---|
| 160 | Fan anomaly | An anomaly has been detected in the operation of the fan. This may affect the evacuation of combustion gases. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Baxi 125057000 fan datasheet
- Catalogue reference
- 125057000
- Uniclima internal SKU
- EBNP28/28F
- Brand
- Baxi
- Type of part
- Extractor fans
- Units in stock
- 2 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Voltage
- 230V AC
- Frequency
- 50Hz
- Power
- 83W
- Insulation class
- I Cl.F
- Part code (ebm-papst)
- 55667.31741
- OEM/alternative codes
- 7664449.01 / 7665149.01
- Factory code
- FA 482103
- Batch/date
- DE(L) 2517
- Place of manufacture
- Made in Germany
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Baxi Neodens Plus 24/24 F Manual (PDF) Document © Baxi, provided as a technical reference.
Frequently asked questions about the extractor 125057000
Is the extractor of the Baxi Neodens Plus 28/28F an original ebm-papst part?
Is Baxi the manufacturer of this extractor or is it a component from a third party?
What code should I check in the extractor of my Baxi Platinum Compact 28/28F?
When should the extractor of a Baxi Neodens Plus be replaced?
Is this ebm-papst extractor suitable for a Baxi Platinum Duo Plus 24 AIFM?
