Extractor Fan Baxi Roca Victoria 24/24F
In the Roca boiler range, the Roca Victoria 24/24F Extractor Fan is responsible for expelling combustion gases and creating the necessary draft for the boiler to start. If this part fails, you will notice that the boiler does not ignite or locks out due to a fault in the flue gas evacuation, and the fault code E03 may appear. This fan is also compatible with models from the Neobit and Altais ranges, among others. A technician must confirm through diagnosis whether it needs to be replaced when it shows faults in its operation.
- Type of part
- Extractor fans
- Status
- Refurbished
- Catalogue reference
- 125027080
- Warranty
- 1 year
Baxi Roca boilers compatible with reference 125027080
Extractor with reference 125027080. Three confirmed compatibilities: Neobit S 24/24F and Neobit Plus 24/24F.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Baxi Roca Neobit S 24/24F | Neobit | Contrasted |
| Baxi Roca Neobit Plus 24/24F | Neobit | Contrasted |
| Baxi Roca Altais 24/24F V.01 | Altais | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 125027080 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 125027080. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the extractor 125027080
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler turns on, makes an attempt to ignite, and after a few seconds, it shuts off with a fault related to air or the extractor.
Cause: The air pressure switch does not detect that the fan is spinning correctly, and the electronics cut off the gas for safety.
Before changing the extractor, check that the silicone tubes going to the pressure switch are not broken, loose, or blocked.
- 02
A beep, squeak, or buzz different from the usual is heard when the boiler tries to start.
Cause: The extractor motor has a worn bearing or the impeller is rubbing against the casing.
With the boiler unplugged, manually turn the impeller: if it is difficult, makes noise, or has play, it confirms wear.
- 03
The fan does not start spinning, or it stops even though the PCB sends the start command.
Cause: The motor winding is interrupted and does not generate starting torque.
Check that the extractor connector is properly seated and without bent pins before replacing the part.
- 04
The boiler fails more often when starting cold than when it has been running for a while.
Cause: An extractor that starts to fail needs more boost at the start, and this is especially noticeable when the motor is cold.
Note if the fault occurs more frequently in the early hours: it points to an extractor that is underperforming, not to another specific cause.
Fault codes Baxi Roca that require diagnosis
| Code | Fault | Technical checks |
|---|---|---|
| E03 | Flue thermostat operation / flue pressure switch | The fan/extractor blocked or faulty does not generate the expected depression in the Venturi; the pressure switch does not switch, and the PCB locks with E03. Check 230 V to the motor, free rotation, and depression in the pressure switch intake tube (and continuity of the pressure switch with the fan running). |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for Baxi Roca extractor 125027080
- Catalogue reference
- 125027080
- Uniclima internal SKU
- ECRV2424F
- Brand
- Baxi Roca
- Type of part
- Extractor fans
- Units in stock
- 2 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Voltage
- 230V ~ 50Hz
- Power
- 8W
Frequently asked questions about the extractor 125027080
Is the extractor fan ECRV2424F compatible with the Baxi Roca Victoria 24/24F?
What models are compatible with the extractor fan ECRV2424F?
What is the voltage and power of the extractor fan ECRV2424F?
What fault code is documented for the extractor fan ECRV2424F?
Can I use the extractor fan ECRV2424F in a boiler Altais 24/24F V.01?
