Honeywell Gas Valve Saunier Duval ThemaClassic F 24 E Ref. 115 018 D

Saunier Duval boilers compatible with reference S1071500

Gas valve with reference S1071500. 28 verified compatibilities: C24E and C25E.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. S1071500 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference S1071500. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the gas valve S1071500

The gas valve regulates and modulates the gas flow to the burner. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler does not ignite: you can hear the attempt, but no gas reaches the burner.

  Cause: The solenoid of the valve does not receive or execute the opening command from the control unit.

  Measure with the multimeter that current is reaching the connector of the gas valve during the ignition attempt, before replacing it.

• 02

  The flame either fires at maximum power or shuts off by itself without reason.

  Cause: The modulating coil is not properly regulating the gas flow, and the valve is operating in an all-or-nothing manner instead of modulating.

  Check that the connector of the modulating coil is properly fitted and free of corrosion before replacing the entire gas valve.

• 03

  After turning off the boiler, there is still a gas smell for a while.

  Cause: The shut-off solenoid does not seal completely, leaving a small residual gas passage.

  With the boiler cold and turned off, check the outlet of the valve to the burner with soapy water before concluding that it does not close.

• 04

  The boiler performs worse or locks up when there is higher gas consumption in the home.

  Cause: In butane-propane installations, a valve that no longer regulates well is more sensitive to pressure variations from the bottle or tank.

  Measure the level of the bottle or tank and the outlet pressure of the gas regulator before declaring the fault on the gas valve.

Fault codes Saunier Duval that require diagnosis

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval gas valve S1071500.

Catalogue reference

S1071500

Uniclima internal SKU

VGBPTF24E

Brand

Saunier Duval

Type of part

Gas valves

Units in stock

7 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Reference

115 018 D

Manufacturer code

CE-448M85J1

Honeywell model

VK8525M1052

Modulating coil voltage

24 VDC

Modulating coil power

6 VA

Gas

Butane-Propane

Degree of protection

IP20

Maximum pressure

60 mbar

Solenoid voltage I1

220 Vac (6 VA)

Solenoid voltage V2

24 Vac (6 VA)

Classification

Group 1 Class B+B

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Saunier Duval ThemaClassic F25E Manual (PDF) Document © Saunier Duval, provided as a technical reference.