Safety Valve ZWB/ZWBC/ZWBE Ref. 8716106431

Junkers boilers compatible with reference 8716106431

Safety valve with reference 8716106431. 12 verified compatibilities: ZWBC 24-2 C 23 and ZWBC 24-2 C 31.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. 8716106431 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 8716106431. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the safety valve 8716106431

The safety valve releases pressure when the circuit exceeds its setting. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The valve is continuously leaking through the drain tube, even with the boiler cold.

  Cause: The internal seat does not close completely after releasing pressure once and allows water to pass continuously.

  Gently pull the lever or loosen the bleed screw for a second and release: if it continues to drip when closed, the seat is worn out.

• 02

  Water is coming out of the drain even though the boiler hasn't been very hot and the pressure hasn't increased on the gauge.

  Cause: It is usually the expansion vessel lacking sufficient air, which transfers the pressure surge to the valve that it should absorb itself.

  With the boiler cold and no water pressure in the circuit, check the air pressure in the expansion vessel before replacing the valve.

• 03

  The boiler gradually loses pressure and needs to be refilled every few days.

  Cause: A small and constant leak from the valve seat empties the circuit without any noticeable dripping.

  Dry the drain area thoroughly and check after a few hours to see if it has become damp again, even if you don't see any dripping at first glance.

• 04

  The circuit is overpressurized and the valve does not open or release water.

  Cause: The stem gets stuck due to accumulated lime or rust and does not move to release the pressure.

  Before replacing, manually operate the bleed lever to see if it releases any water; if nothing moves, confirm the blockage.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Junkers 8716106431 safety valve.

Catalogue reference

8716106431

Uniclima internal SKU

VSCC

Brand

Junkers

Type of part

Safety valves

Units in stock

3 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Junkers ZWBC 28-2 C 31 manual (PDF) Document © Junkers, provided as a technical reference.