Filling Key Kramer for Boiler Wiesberg RSSE 24 - Ref. 95000104
RefurbishedWiesbergFilling valvesKramer

Filling Key Kramer for Boiler Wiesberg RSSE 24 - Ref. 95000104

Stock · 5 units

If you cannot fill the heating circuit or notice a water leak, you may need the Kramer filling key for the Wiesberg RSSE 24 boiler - Ref. 95000104. This component allows you to replenish water in the heating circuit to maintain the proper pressure. When it fails, it can cause improper filling or water leakage, which may lead to increased pressure. It is compatible with models such as Wiesberg RSN 24 and Wiesberg RSSE 24, among others. It is recommended to replace it when these symptoms are present or it is not functioning correctly.

VAT included

Compatibility

Wiesberg boilers compatible with reference 95000104

Filling key with reference 95000104. Two confirmed compatibilities: Wiesberg RSN 24 and Wiesberg RSSE 24.

Proven compatibility

Boiler modelFamilyVerification
Wiesberg Wiesberg RSN 24WiesbergContrasted
Wiesberg Wiesberg RSSE 24WiesbergContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 95000104 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 95000104. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the filling valve 95000104 resolves.

The filling valve allows water to refill the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler pressure does not hold and needs to be refilled every few days.

    Cause: If the internal closure of the valve does not seat properly, it allows water to flow continuously and the pressure does not stabilize.

    Close the valve completely and monitor the pressure gauge for a couple of hours: if the pressure continues to fluctuate, the valve may be the problem.

  • 02

    When trying to fill the circuit, the valve does not allow water to pass through.

    Cause: Dirt or limescale deposits can block the internal passage of the valve, especially in installations with hard water.

    Make sure that the main valve of the house is open and that the filling hose, if it has one, is not bent.

  • 03

    Moisture or droplets are noticeable around the knob of the valve.

    Cause: The wear of the stem seal over time allows water to escape externally, even though the internal closure is functioning.

    Dry the area, tighten the compression nut a bit, and check after a few hours if humidity reappears before replacing the part.

  • 04

    The knob turns very hard or gets stuck halfway through.

    Cause: The internal mechanism of these valves gets stuck with limescale if it goes unused for a long time.

    Try to move it gently in small increments, without forcing, before deciding that the mechanism is stuck.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the filling key Wiesberg 95000104

Catalogue reference
95000104
Brand
Wiesberg
Type of part
Filling valves
Units in stock
5 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Actual manufacturer
Kramer
Frequently Asked Questions

Frequently asked questions about the filling key 95000104

Is this filling valve suitable for the Wiesberg RSSE 24 boiler?
Yes, the Wiesberg RSSE 24 is on the list of compatible boilers for reference 95000104.
Who manufactures the filling valve Ref. 95000104?
The Kramer factory, according to the embossed marking 'KRAMER' on the front of the knob; does not carry the boiler brand.
Is it an original Wiesberg part?
No, the part does not carry the boiler brand, the actual manufacturer is Kramer.
How many models are compatible with this filling key?
The filling valve has 2 confirmed models in the compatibility table.
What is the reference for this filling key?
The reference for the filling key is LLWRSSE24.
Is this filling key compatible with other boiler models?
It is only compatible with the Wiesberg RSN 24 and Wiesberg RSSE 24 models.

Spare parts related to Wiesberg Wiesberg

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Filling Key Kramer for Boiler Wiesberg RSSE 24 - Ref. 95000104