Hydraulic Component For C Series, Capriz And Other Boilers Ref. D003200152

Airsol boilers compatible with reference D003200152

Hydraulic group with reference D003200152. 18 verified compatibilities: Vizo 24 and Vizo 24 Plus.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if the reference D003200152 is the part for your boiler.

What determines it is not the boiler model, but the reference printed on the part you already have installed.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference D003200152. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms and faults that the hydraulic group D003200152 resolves.

The hydraulic group includes the valve, the by-pass, and the water connections. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  Humidity, limescale or some drop appears right in the area where this part is mounted.

  Cause: The clamp or the internal gasket of the component loses its seal over time and allows water from the circuit to pass through.

  Dry the area, turn on the boiler, and let it run for a few minutes to confirm that the leak is coming from there and not from a nearby fitting.

• 02

  The pressure in the circuit is gradually decreasing, and it is necessary to refill water more frequently than usual.

  Cause: A small leak at this point in the hydraulic circuit is not always visible at first glance but is gradually releasing pressure.

  Check the floor or bottom of the boiler for moisture before considering this part as the source.

• 03

  There is a noticeable knocking or vibration noise in that area when the pump starts.

  Cause: If the clamp does not hold the part securely, the water pressure itself causes it to vibrate against the chassis or nearby pipes.

  Check visually that the clamp is properly fitted and tightened before considering replacing the component.

• 04

  The part appears to be cracked, deformed, or has limescale stains where it didn't have any before.

  Cause: The material of this type of hydraulic component degrades over the years due to continuous contact with hot water.

  Compare its condition with that of a new part before confirming that it needs to be replaced.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Hydraulic group data sheet Airsol D003200152

Catalogue reference

D003200152

Brand

Airsol

Type of part

Hydraulic units

Units in stock

4 units

Status

Refurbished

Warranty

1 year

Shipping

1-2 business days

Return

14 days

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Airsol Capriz 25 Manual (PDF)Document © Airsol, provided as a technical reference.