Delta Dore Keyboard PCB Ref. 0020013051 - Saunier Duval ThemaClassic F 25 E
Control board for the control panel, manufactured by Delta Dore, reference 0020013051, for Saunier Duval boilers in the ThemaClassic, Thema, and Isotwin F/C 24-28 ranges. It is not manufactured by Saunier Duval, although it is installed in their boilers. It is replaced when the control panel does not respond or the display does not work.
VAT included
Consult via WhatsAppSaunier Duval boilers compatible with reference S1062000
PCB with reference S1062000. Three confirmed compatibilities: ThemaClassic F 25 E and ThemaClassic C 25 E.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Saunier Duval ThemaClassic F 25 E | ThemaClassic | Contrasted |
| Saunier Duval ThemaClassic C 25 E | ThemaClassic | Contrasted |
| Saunier Duval Isotwin F 28 EA | Isotwin | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. S1062000 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference S1062000. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB S1062000 resolves.
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
You press the buttons on the panel and the boiler does not respond to any command.
Cause: The control board does not register the key presses, even though the boiler continues to operate internally.
Check if the boiler continues to heat up to the last set point: if so, the fault is with the keypad and not with the main PCB.
- 02
The screen is black or does not turn on, even though the boiler is powered.
Cause: There is a problem with the power supply or the electronics of the display on the control board.
Check the flat cable or the connector that connects the keyboard to the main PCB: a poor connection can cause this symptom.
- 03
The fault codes do not appear on the screen when the boiler locks out.
Cause: The keyboard does not receive or cannot display the information from the main PCB.
Note if the boiler attempts to ignite (pump, fan) to determine if the fault is only a display issue.
- 04
The keyboard works intermittently: sometimes it responds and sometimes it freezes.
Cause: There is an intermittent communication fault between the keyboard and the PCB, typical of a degraded component on the keyboard board.
Turn off the power and turn the boiler back on from the main switch, and check if the control panel takes time to respond.
Fault codes from Saunier Duval that this spare part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F11 | No signal is reaching the main circuit (communication fault with the interface/MMI). | The User Interface PCB (S1062000) or its MMI harness do not send/receive data to the main PCB; check 5 V/ground on the interface connector, continuity of the MMI cable, and test with a known good S1062000 interface. |
| F12 | No signal from the user interface or remote panel. | The user interface (S1062000) is faulty or not powered, and the main PCB is not receiving its signal; check the power supply to the interface, inspect/clean the connector, and replace the S1062000 if it does not communicate. |
| F18 | Local user interface fault. | Internal fault in the Interface PCB (keyboard/display S1062000) preventing correct operation; check that it powers on/reads keys, measure its power supply, and replace the S1062000 if the fault persists. |
| F20 | Interface software incompatible with the boiler. | An incorrect interface/display has been installed (different version/software) or without proper coding; confirm S1062000 reference is correct for the model and replace with a compatible interface or reconfigure the appliance code if applicable. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Saunier Duval S1062000 PCB.
- Catalogue reference
- S1062000
- Brand
- Saunier Duval
- Type of part
- PCBs (control boards)
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Manufacturer reference
- 0020013051
- Secondary code (label)
- 7154063
- The actual manufacturer of this part is Delta Dore, not Saunier Duval, although it is installed in Saunier Duval boilers. The current catalog does not indicate this.
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Saunier Duval Themaclassic F 25 E Manual (PDF)Document © Saunier Duval, provided as a technical reference.
Frequently asked questions about the PCB S1062000
Who manufactures the keyboard PCB of the Saunier Duval ThemaClassic F 25 E?
Does this keyboard PCB 0020013051 work for an Isotwin F 24 EA?
What fault does replacing this control board resolve?
How do I distinguish this PCB from other similar keyboard ones?
Spare parts related to Saunier Duval ThemaClassic
