Wiesberg RSSE 24 Boiler Extractor Ref. 95261072
If your boiler does not ignite or gets blocked due to a fault in the flue gas evacuation, you may need the Wiesberg RSSE 24 Extractor Ref. 95261072. This component is responsible for evacuating combustion gases and creating the necessary draft for the boiler to start. When it fails, you will notice that the boiler does not start correctly. It is compatible with models such as RSS 24 and RSSE 24, among other boilers in the Wiesberg RSS / RSSE (Unical Dua) range. It is recommended to replace this extractor when it presents faults that affect the ignition of the boiler.
VAT included
Consult via WhatsAppWiesberg boilers compatible with reference 95261072
Extractor with reference 95261072. Two confirmed compatibilities: RSS 24 and RSSE 24.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Wiesberg RSS 24 | Wiesberg RSS / RSSE (Unical Dua) | Contrasted |
| Wiesberg RSSE 24 | Wiesberg RSS / RSSE (Unical Dua) | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the reference 95261072 is the part for your boiler.
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 95261072. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the extractor 95261072 resolves.
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
After a summer without using the heating, the boiler won't start and shows a fan fault.
Cause: The extractor has been stopped and the shaft has seized due to accumulated dust.
Before replacing it, try to unstick it by manually turning the turbine with the boiler unplugged.
- 02
A metallic knocking or rubbing sound is heard every time the extractor starts.
Cause: The rotor is rubbing against the casing because the bearing has play after years of use.
Listen to see if the noise occurs only at startup or persists throughout the cycle; if it is only at startup, check the capacitor first.
- 03
The boiler fails more when it rains or there is high humidity, and the rest of the time it works well.
Cause: Humidity affects the motor insulation and causes it to lose power temporarily.
Check that the flue gas outlet does not have accumulated water and that the extractor is not exposed to leaks before replacing it.
- 04
The extractor is spinning, but very slowly, almost at idle, and the boiler does not ignite.
Cause: The motor has lost power and does not reach the minimum revolutions required by the pressure switch.
At a glance, compare the rotation speed with what you remember from before; a clear difference points to the extractor.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Wiesberg extractor 95261072
- Catalogue reference
- 95261072
- Brand
- Wiesberg
- Type of part
- Extractors
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Frequently asked questions about the extractor 95261072
Is this extractor Ref. 95261072 compatible with a Wiesberg RSSE 24 boiler?
Is this extractor suitable for a Dua Cargo 24 AE boiler?
Is it suitable for a Baxi Roca Iven B60 TFS boiler?
Spare parts related to Wiesberg Wiesberg RSS / RSSE (Unical Dua)
