
Beretta Mynute Green 28 CSI Circulating Pump - Ref. R10027258
The Beretta Mynute Green 28 CSI Circulating Pump is responsible for moving water through the heating circuit of your boiler. If it fails, you will notice that the radiators remain cold, strange noises may occur, and the boiler may overheat or lock out due to lack of circulation. This pump is compatible with the Beretta Mynute Green range, including the Mynute Green 28 CSI model, among others. It is advisable to replace it when these symptoms appear to avoid larger issues.
VAT included
Consult via WhatsAppBeretta boilers compatible with reference R10027258
Circulating pump with reference R10027258. A proven compatibility: Mynute Green 28 CSI.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Beretta Mynute Green 28 CSI | Beretta Mynute Green | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the part R10027258 is the one for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference R10027258. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the circulator pump R10027258 resolves.
The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The heating warms some areas of the house while others remain cold.
Cause: the hot water does not circulate well and does not reach all the radiators
balance the radiator valves and make sure that all are bled correctly before considering the pump
- 02
There is a rubbing or vibrating noise coming from where the pump is mounted.
Cause: the internal rotor may be rubbing due to limescale buildup, especially in areas with hard water
check if the noise changes when bleeding air from the circuit before considering that the pump is damaged
- 03
The boiler stops and displays a warning related to circulation or flow.
Cause: the control board detects that the water is not circulating as it should and shuts down for safety reasons
check that the nearest shut-off valve to the pump is fully open; it sometimes gets accidentally closed during a service check
- 04
The pump does not start after being idle for a while, for example at the end of summer.
Cause: the rotor can become stuck due to sediment if it hasn't turned for months
With the boiler turned off, try to move the shaft by hand from the front screw before considering it a loss.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Beretta R10027258 circulation pump.
- Catalogue reference
- R10027258
- Brand
- Beretta
- Type of part
- Pumps
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Beretta Mynute Green 28 CSI Manual (PDF)Document © Beretta, provided as a technical reference.












