Beretta Super Exclusive 24 CSI PCB - Ref. 20205196

Beretta boilers compatible with reference 20205196

PCB with reference 20205196. Two confirmed compatibilities: Super Exclusive Ecomix 24 CSI and Super Exclusive Ecomix 28 CSI.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if the ref. 20205196 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 20205196. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis on the PCB 20205196

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler does not ignite and the display is off.

  Cause: There is no power reaching the PCB, so the boiler does not receive the command to turn on.

  Check if there is power to the PCB and verify that the input fuse is not blown before replacing it.

• 02

  The pump or the fan is always on or does not start when the boiler needs heat.

  Cause: The output relays activate the components; if one fails, that element does not respond to the command.

  With the boiler turned off, check if the component is still functioning or if it doesn't start when the demand is forced; this helps to identify the relay before replacing the entire PCB.

• 03

  The boiler locks out displaying different fault codes without a clear pattern.

  Cause: A damaged connector or a loose contact on the PCB causes incorrect readings that the electronics interpret as sensor faults.

  Note the fault codes that appear; if they change without a fixed pattern, it is more likely that the problem is with the PCB and not with a loose sensor.

• 04

  The room thermostat does not affect the boiler, which does not start even when heat is requested.

  Cause: The PCB translates the thermostat signal into a power-on command; if it fails, the request is not processed.

  Do not force, hit, or bridge the component. Request a technical check according to the equipment manual before deciding on its replacement.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Beretta PCB 20205196

Catalogue reference

20205196

Uniclima internal SKU

PECSE24CSI

Brand

Beretta

Type of part

PCBs (control boards)

Units in stock

4 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Relays

Finder