Beretta Super Exclusive Ecomix 24 CSI PCB Ref. R10024558

Beretta boilers compatible with reference R10024558

PCB with reference R10024558. 22 verified compatibilities: Super Exclusive MIX 24 CSI and Super Exclusive MIX 26 CSI.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. R10024558 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference R10024558. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms and faults that the PCB R10024558 resolves.

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The Beretta boiler does not ignite and the panel is completely off.

  Cause: The PCB controls the power supply of the equipment; if it doesn't work, no power reaches anything.

  Check the fuse on the PCB and verify that it is receiving 230V before replacing it.

• 02

  The boiler displays a fault code that appears and disappears on its own, without any repairs being made.

  Cause: An intermittent fault in the control electronics can cause errors that do not correspond to a broken component.

  Note when the code appears to rule out pressure or voltage drops in the home.

• 03

  The burner ignites but turns off after a few seconds with a flame lockout.

  Cause: The PCB interprets the ionization signal; if it fails, it cuts off the gas even if the flame is present.

  Clean the ionization electrode and check its cable before replacing the PCB.

• 04

  The boiler does not respond to any button on the control panel.

  Cause: The PCB manages the user interface; if it fails, the buttons have no effect.

  Make sure that the connector between the control panel and the PCB is properly fitted before replacing the part.

Fault codes for Beretta that this part resolves.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Beretta PCB R10024558

Catalogue reference

R10024558

Brand

Beretta

Type of part

PCBs (control boards)

Units in stock

1 unit

Status

Refurbished

Warranty

1 year

Shipping

1-2 business days

Return

14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Code printed on the PCB

10024558

Hardware version

HW:0.2

Traceability number

20420201179900054

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Beretta Super Exclusive Eco Mix 24 CSI Manual (PDF)Document © Beretta, provided as a technical reference.