Saunier Duval Themaplus C 23 E PCB

Saunier Duval boilers compatible with reference 05741000

PCB with reference 05741000. Eight confirmed compatibilities: C 23 E and F 23 E.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. 05741000 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 05741000. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis on the PCB 05741000

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler turns off by itself intermittently, without a clear pattern.

  Cause: A contact or soldering fault on the PCB can intermittently cut off the power supply.

  With the boiler running, carefully move the connectors on the PCB to see if the cut occurs again when touching any cable.

• 02

  The boiler does not ignite and there are no LEDs or indicators active on the panel.

  Cause: If the transformer on the PCB does not deliver the necessary 24 V, no element of the panel can be activated.

  Measure with a multimeter if there is voltage at the output of the transformer on the PCB before declaring it faulty.

• 03

  The room thermostat is calling for heat, but the boiler is not responding.

  Cause: The PCB receives the signal from the thermostat and commands the start; if the input circuit fails, the demand does not activate anything.

  Do not bridge contacts or power components directly to test them. Request a technician to check the cause according to the model manual and its revision, without bypassing the protections. The symptom or fault code does not confirm on its own that this part is faulty.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval 05741000 PCB.

Catalogue reference

05741000

Uniclima internal SKU

PLCTMPC23

Brand

Saunier Duval

Type of part

PCBs (control boards)

Units in stock

5 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Manufacturer

Saunier Duval

PCB code

ST1488

PCB certification code

1293 94V-0 fuba T

Main chip

ART7488RR-3703V

Transformer - primary

24 V 50/60 Hz

Transformer - secondary

A8V 0.05VA

Relay (code)

23535-A, 24V 50/60Hz

White relay - manufacturer

Schrack, marking D272 ECD41-A?MF A422 (relay manufacturer, not the PCB)

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Saunier Duval C AS 23 E Manual (PDF) Document © Saunier Duval, provided as a technical reference.