
Wilo Circulating Pump INTMTSL15/6 HE-2 For Chaffoteaux Pigma Green 25 Boiler
The Wilo INTMTSL15/6 HE-2 circulator pump is compatible with Chaffoteaux Pigma boilers, such as the Pigma Green 25. This part is responsible for moving water through the heating circuit. When it fails, it is common for the radiators to be cold, to hear strange noises, or to experience overheating and blockages due to lack of circulation. It is installed in models like the Pigma 25 FF and the Pigma Green, among other boilers in the same range. It should be replaced when these symptoms are detected or when fault codes 1 03 or 1 04 are presented.
VAT included
Consult via WhatsAppChaffoteaux boilers compatible with reference 65120952
Circulating pump with reference 65120952. 11 verified compatibilities: Pigma Green 25 and Pigma 25 FF.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Chaffoteaux Pigma Green 25 | Chaffoteaux Pigma | Contrasted |
| Chaffoteaux Pigma 25 FF | Chaffoteaux Pigma | Contrasted |
| Chaffoteaux Pigma Green | Chaffoteaux Pigma | Contrasted |
| Chaffoteaux Alixia 24 FF | Chaffoteaux Alixia | Contrasted |
| Chaffoteaux Genus Premium | Ariston Genus | Contrasted |
| Chaffoteaux Genus 24/28 FF | Ariston Genus | Contrasted |
| Chaffoteaux Clas Premium | Ariston Clas | Contrasted |
| Chaffoteaux Clas 24/28 FF | Ariston Clas | Contrasted |
| Chaffoteaux Egis Plus 24 FF | Ariston Egis/BS/BIS | Contrasted |
| Chaffoteaux BS II 24 FF | Ariston Egis/BS/BIS | Contrasted |
| Chaffoteaux BIS 24 FF | Ariston Egis/BS/BIS | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 65120952 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 65120952. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the circulation pump 65120952 resolves.
The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler ignites and the burner works, but the radiators are cold or only lukewarm.
Cause: The impeller of the pump does not rotate or does so weakly, which means that hot water does not reach the radiators even though the boiler produces heat.
Touch the body of the pump while the boiler is running: if you feel vibration but do not hear it spinning, try to unlock it with the shaft screw before replacing it.
- 02
The pump makes a buzzing sound or vibrates with a strange noise while the heating is operating.
Cause: This is usually air trapped in the circuit or scale rubbing against the impeller, it does not always indicate a motor fault.
Bleed the pump and the radiators before considering that the pump is faulty; in many cases, the noise disappears just by doing this.
- 03
After the summer, the pump won't start; it seems to be stuck.
Cause: The shaft gets stuck due to sediment and inactivity after months of not operating in heating mode.
With the boiler turned off and unplugged, try turning the central screw of the shaft with a screwdriver to release it before replacing it.
- 04
There is a water leak in the area of the pump, with moisture or dripping around.
Cause: The internal mechanical seal wears out over time and allows water to pass through the shaft.
Dry the area well and check again after a while of operation: if the leak comes from a joint or fitting nearby and not from the body of the pump, the problem is not the pump.
Fault codes Chaffoteaux that this part resolves
| Code | Fault | Diagnosis and solution |
|---|---|---|
| 1 03 | Insufficient circulation in the heating circuit. | The circulating pump (65120952) blocked/faulty or without power does not generate flow and the control detects lack of circulation; check voltage/consumption at terminals, rotor rotation, and ensure the pump LED is not red (blocked), as well as force a bleed to confirm flow. |
| 1 04 | Insufficient circulation (variant of flow defect in Chaffoteaux models). | If the pump does not circulate water (seizure/fault or electrical failure), the electronics detect an abnormal temperature/flow evolution and trigger 1 04; check power supply and rotor rotation, bleed air, and confirm ΔT flow/return according to flow rate. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Chaffoteaux circulator pump 65120952
- Catalogue reference
- 65120952
- Brand
- Chaffoteaux
- Type of part
- Pumps
- Units in stock
- 2 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Wilo model
- INTMTSL15/6 HE-2
- Voltage / frequency
- 230V 50Hz
- Power / current speed I
- 77 W / 0.34 A
- Power / current speed II
- 58 W / 0.28 A
- Wilo item code
- N° 4519925
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Chaffoteaux Pigma Green 25 Manual (PDF)Document © Chaffoteaux, provided as a technical reference.












