Fagor PCB FE24E1N Ref. N03G002M3
RefurbishedFagorPCBs (control boards)

Fagor PCB FE24E1N Ref. N03G002M3

Stock · 2 units

Control PCB manufactured by Fagor, reference N03G002M3, confirmed both on the part's label and by external sources. It has a protection rating of IP00 and an integrated circuit marked VISUA 201. It is the main board of the boiler. Compatible with Fagor boilers CE30E1N, FE20E1N, and FE24E1N. It is replaced when the control board fails.

VAT included

Compatibility

Fagor boilers compatible with reference N03G002M3

PCB with reference N03G002M3. Four confirmed compatibilities: FE-24E and FE24E1N.

Proven compatibility

Boiler modelFamilyVerification
Fagor FE-24EFagor Super CompactContrasted
Fagor FE24E1NFagor Super CompactContrasted
Fagor FE20E1NFagor Super CompactContrasted
Fagor CE30E1NFagor Super CompactContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. N03G002M3 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference N03G002M3. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB N03G002M3 resolves.

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler does not ignite and there is no reaction on the control panel.

    Cause: The control board manages the ignition; if its electronics fail, no command reaches any component.

    Check that the installation's differential has not tripped and that the boiler is receiving power before suspecting the PCB.

  • 02

    A different fault code appears every time you try to turn on the boiler.

    Cause: A PCB with intermittent faults generates erratic readings from the sensors and triggers codes that change without a pattern.

    Note the codes that appear in various attempts; if they vary without logic, focus more on the PCB than on a specific sensor.

  • 03

    The remote control does not respond when you press any button, not even the power button.

    Cause: The microcontroller on the control board is the one that receives and executes the button presses from the panel.

    Check that the wiring from the control panel to the PCB is properly connected before replacing the PCB.

  • 04

    The boiler turns on but shuts off by itself without any visible fault code.

    Cause: The PCB can lose an internal signal and interrupt the cycle without displaying the corresponding fault.

    Check if the cut coincides with the start of the pump or the burner; this helps to narrow down the fault before changing the PCB.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Fagor N03G002M3 PCB.

Catalogue reference
N03G002M3
Brand
Fagor
Type of part
PCBs (control boards)
Units in stock
2 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

PCB reference
N03G002M3
Manufacturer
Fagor
IP protection rating
IP00
Integrated circuit code
VISUA 201 CHKSM:717AFB
Batch/serial marking
S048
Before purchasing
  • External sources cite more Fagor boilers compatible with this reference, but each is only cited by one source; they are not included in the datasheet until confirmed by a second independent source.
Frequently Asked Questions

Frequently asked questions about the PCB N03G002M3

Is this PCB Ref. N03G002M3 an original Fagor part?
The manufacturer listed both on the part label and in external sources is Fagor.
What function does this PCB serve in the Fagor FE24E1N boiler?
It is the main control PCB of the boiler.
Is this Fagor N03G002M3 PCB compatible with a CE30E1N?
Yes, the CE30E1N is on the list of compatible boilers, along with FE20E1N and FE24E1N.
How do I check that this is the PCB for my Fagor FE 24E N?
Checking that the model of your boiler is FE24E1N, CE30E1N, or FE20E1N and that the reference N03G002M3 matches the one printed on your PCB.
Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Fagor PCB FE24E1N Ref. N03G002M3