
Three-Way Valve Actuator Motor Saunier Duval Themaclassic C 25 E - Ref. 105901
If you notice that you only have hot water and no heating, or that both circuits are mixing, you may need the actuator motor for the 3-way valve Saunier Duval ThemaClassic C 25 E - Ref. 105901. This part is responsible for switching the water between the heating circuit and the domestic hot water circuit. It is installed in boilers from the ThemaClassic range, such as the C 25 E, F 25 E, and other models, as well as in some from the Themafast, Isofast, Isomax, Isotwin, and Combitek ranges. It is advisable to replace it when the mentioned symptoms occur.
VAT included
Consult via WhatsAppSaunier Duval boilers compatible with reference S5720600
3-way valve with reference S5720600. 25 confirmed compatibilities: C 24 E and F 24 E.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Saunier Duval C 24 E | ThemaClassic | Contrasted |
| Saunier Duval F 24 E | ThemaClassic | Contrasted |
| Saunier Duval F 25 E | ThemaClassic | Contrasted |
| Saunier Duval C 25 E | ThemaClassic | Contrasted |
| Saunier Duval F 30 E | ThemaClassic | Contrasted |
| Saunier Duval F AS 25 E | ThemaClassic | Contrasted |
| Saunier Duval F AS 30 E | ThemaClassic | Contrasted |
| Saunier Duval C 24 E | Themafast | Contrasted |
| Saunier Duval F 24 E | Themafast | Contrasted |
| Saunier Duval F 30 E | Themafast | Contrasted |
| Saunier Duval C 28 E | Themafast | Contrasted |
| Saunier Duval C 28 E | Isofast | Contrasted |
| Saunier Duval F 28 E | Isofast | Contrasted |
| Saunier Duval C 35 E | Isofast | Contrasted |
| Saunier Duval F 35 E | Isofast | Contrasted |
| Saunier Duval C 28 E | Isomax | Contrasted |
| Saunier Duval F 28 E | Isomax | Contrasted |
| Saunier Duval C 28 E2 | Isomax | Contrasted |
| Saunier Duval F 28 E2 | Isomax | Contrasted |
| Saunier Duval C 24 EA | Isotwin | Contrasted |
| Saunier Duval C 28 EA | Isotwin | Contrasted |
| Saunier Duval F 24 EA | Isotwin | Contrasted |
| Saunier Duval F 28 EA | Isotwin | Contrasted |
| Saunier Duval C 24 E | Combitek | Contrasted |
| Saunier Duval F 24 E | Combitek | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. S5720600 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference S5720600. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the S5720600 three-way valve resolves.
The 3-way valve diverts water between heating and domestic hot water. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler is stuck in one mode: it either heats radiators or provides hot water, and it does not switch from one to the other.
Cause: The motor of the 3-way valve does not complete the rotation, so the diverter remains halfway between the two circuits.
Before replacing the motor, check if it reaches the end of its travel: almost all have a visible position mark or arrow on the body.
- 02
A buzzing or forced motor noise is heard when the boiler tries to switch circuits.
Cause: The motor is powered and tries to turn, but the internal stem of the valve is seized, usually due to lime or dirt.
Disassemble the motor and manually check if the shaft rotates freely; if it's difficult to move, the issue might be with the valve body, not the motor.
- 03
The switching between heating and domestic hot water takes longer than usual or gets stuck halfway.
Cause: It is a typical symptom of wear in the internal reduction gear of the motor, which loses strength over years of use.
Time how long it takes to switch; if the time has increased week after week, it points to mechanical wear of the motor.
- 04
The boiler gives a warning or locks up just when it should switch between heating and domestic hot water.
Cause: The motor's limit switch does not confirm the position to the control unit, which for safety reasons locks the equipment.
Check the motor's electrical connector and ensure that the wires are not loose, frayed, or corroded before considering it faulty.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Saunier Duval S5720600 three-way valve.
- Catalogue reference
- S5720600
- Brand
- Saunier Duval
- Type of part
- 3-way valves
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Voltage
- 220-240V
- Frequency
- 50/60Hz
- Thermal class
- T70
- Part code
- 105901
- Manufacturer reference
- 00316511000.03
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Saunier Duval F 25 E Manual (PDF)Document © Saunier Duval, provided as a technical reference.












